By BerryVery
Sun Jul 03, 2022 6:00 am
DET1200 wrote:kb420ps wrote:I've come across a bug in Controller Mode.
I'm using a MPC X on a Windows 11 computer.
Firmware and Software Version 2.11.2
In Controller Mode when trying to switch sequences or tracks, the Data Dial on the MPC X will only work in increments of 2. In other words, if you are on Sequence 1, and attempt to switch to Sequence 2, you can't do it. The Data Dial will only allow you to got to Sequence 3, 5, etc. It does the same thing when trying to switch tracks. If you use the "-" or "+" buttons, you can still switch sequences/tracks in increments of 1, but the Data Dial will only work in increments of 2. Like I said earlier, this only happens in Controller Mode.
Standalone works like it is supposed to.
Have any of you run in to this bug?
Here is a short video demonstrating the bug.
Yup, I have the same thing. At first I thought I went nuts or it would be a hardware thing, but indeed since the 2.11 update, the datawheel jumps in steps of 2. Also, for example when auditioning samples.
This really impacts my workflow...