By dorwernor
Sat Sep 24, 2022 5:46 pm
Hello!
I already spent some time searching the forum for similar issues, but was unable to find a answer to my question so here it goes:
Since plugging in a USB-Midi-Keyboard (Midiplus X2) my MPC Live II takes three minutes to boot.
I'm actually not sure if it's related to that, but this is the last thing I remember doing before the strange behaviour started.
Just for the record: I own this thing for about half a year now and didn't spill drinks on it, didn't drop it or whatsoever.
I'm running firmware 2.10.1 (because the bugs of 2.11.x prevent me from upgrading, mostly the simultanious-midi-note-issue).
I tried
- resetting the preferences numerous times
- booting into diagnostics mode
- upgrading to 2.11.4 and downgrading again.
- renaming the Expansions-Folder (to exclude the previews being the problem here)
- backing up the installed SSD, reformatting and copying the data back on
- disconnecting the internal SSD altogether
...to no avail
Then I installed Firmware 2.10.1 with SSH-Mod and ssh-ed into the mpc.
I ran "systemd-analyze", and it told me boot time was approx. 30 seconds- so the core system is fine.
The GUI-Process itself takes three minutes to start (I stopped the service and ran it "manually"), but is not outputting _any_ messages within that timeframe.
After that the MPC seems to work normally, but waiting three minutes for a boot is... well... a bit unusual and very frustrating to say the least.
Sadly there is no "strace" on this linux-image, so I don't know where to go from here.
Has anyone experienced similar behaviour on their MPCs?
Any suggestions what to try next?
I already spent some time searching the forum for similar issues, but was unable to find a answer to my question so here it goes:
Since plugging in a USB-Midi-Keyboard (Midiplus X2) my MPC Live II takes three minutes to boot.
I'm actually not sure if it's related to that, but this is the last thing I remember doing before the strange behaviour started.
Just for the record: I own this thing for about half a year now and didn't spill drinks on it, didn't drop it or whatsoever.
I'm running firmware 2.10.1 (because the bugs of 2.11.x prevent me from upgrading, mostly the simultanious-midi-note-issue).
I tried
- resetting the preferences numerous times
- booting into diagnostics mode
- upgrading to 2.11.4 and downgrading again.
- renaming the Expansions-Folder (to exclude the previews being the problem here)
- backing up the installed SSD, reformatting and copying the data back on
- disconnecting the internal SSD altogether
...to no avail
Then I installed Firmware 2.10.1 with SSH-Mod and ssh-ed into the mpc.
I ran "systemd-analyze", and it told me boot time was approx. 30 seconds- so the core system is fine.
The GUI-Process itself takes three minutes to start (I stopped the service and ran it "manually"), but is not outputting _any_ messages within that timeframe.
After that the MPC seems to work normally, but waiting three minutes for a boot is... well... a bit unusual and very frustrating to say the least.
Sadly there is no "strace" on this linux-image, so I don't know where to go from here.
Has anyone experienced similar behaviour on their MPCs?
Any suggestions what to try next?