Black Screen MPC Live 2 after wrong update

I went to go update my MPC and accidentally updated with the wrong/old update. After doing so it went to a black screen and has stayed like that since. Ive force shut it off and it turns on and goes through the loading screen but then follows though to a black but on screen. Any tips or suggestions?

Is it responsive to a power off and then Rec + Stop + play Start + power button?

RandomVibration wrote:Is it responsive to a power off and then Rec + Stop + play Start + power button?

Nope. I tried a few times and it just stayed the same

Turn it off completely and hold down the following buttons and press power:

FULL LEVEL + ERASE + PAD BANK C/G

Keep these buttons pressed and release the power button. It should get you into update mode.

Use the USB cable and update your MPC using the desktop update program from Akai.

zangetsu01 wrote:Turn it off completely and hold down the following buttons and press power:

FULL LEVEL + ERASE + PAD BANK C/G

Keep these buttons pressed and release the power button. It should get you into update mode.

Use the USB cable and update your MPC using the desktop update program from Akai.

Thank you so much that worked!

Braugles798 wrote:

Thank you so much that worked!

You’re welcome..!!