Behringer TD-3 not playing recorded piano roll on MPC One+

Hi guys,

I'm struggling with getting the Behringer TD-3 working via Midi on my MPC One+. With the current settings (see linked images below) I can arm the midi track and I can play the TD-3 via my MPC pads. When I press record on the MPC, it is recording the notes that I play. But when I want to replay it, the TD-3 doesn't react on the recorded notes in my piano roll.

I am also using a Behringer Crave and that one is working fine. So it is super strange.

Here are some photos of the settings. Is there something I'm missing?

MPC Preferences / Midi settings:
https://1drv.ms/i/s!AsF_UdEL2HVag6EssHAXDiJWtxp8CA?e=WlAs81
https://1drv.ms/i/s!AsF_UdEL2HVag6EpvgvBYLuM90uhXw?e=HDtVhI
https://1drv.ms/i/s!AsF_UdEL2HVag6ErRLm-d4AUqE-EcA?e=owvb6u

MPC Midi Program settings:
https://1drv.ms/i/s!AsF_UdEL2HVag6Et3wi6JQT9rG0rEg?e=5LM9il

TD-3 Hardware setup (set-up as USB Midi and 24PPQ / midi I/O channel 3):
https://1drv.ms/i/s!AsF_UdEL2HVag6EqW6sFYqTBmbVk7A?e=AzMeF2

I appreciate your efforts and your input

Thanks, Danny

When Monitor is set to 'In', playback from recorded events will not be heard.

Try setting it to 'Merge'

submo wrote:When Monitor is set to 'In', playback from recorded events will not be heard.

Try setting it to 'Merge'

Thanks!! I'll definitely check it out later on!

submo wrote:When Monitor is set to 'In', playback from recorded events will not be heard.

Try setting it to 'Merge'

Thank you very much!! I've tested it and now it works fine!!! Oh man, you don't know how much this was stressing me.