connecting to macbook for file transfer

i remember i used to be able to connect with mpc hard drive with my mpc live 2 but i cant find drivers now on akai website or inmusic software i only see mpc 2 but i dont need that software just the drivers to be able to access hd in controller mode. any help?

I believe the driver is included in the Software/Beats installer.

That said, if you put the MPC in controller mode, it should mount without needing a separate driver.

thats what i thought also, like many devices i have they just appear as a drive in Finder. but it doesnt connect to the computer at all macbook air M1.

it just says need drivers installed of mpc keys 37

No drivers ever required. Just connect using a USB cable, enter controller mode and any attached disk should appear. Internal MPC factory drive cannot be seen.

Any problems, try a different USB cable, different port, avoid hubs, use a hub, reboot computer etc. I had 2 years of thinking my MPC one was faulty, never mounted the SD card in the computer (although controller mode did work). Turned out all I needed to do was swap out the USB cable.

ok ill try that ill come to reply