By jacklindien
Sun Jan 15, 2023 8:51 pm
hellooo everybody
I am trying to sync my force v3.2 with the 2kxl.
I have try with both slave or master without any result. its years i use the mpc so i know how to setting the midi on it (midi in 1 or 2 for slave and midi out A or/and B for master) and i checked very well the manual for the midi sync on the Force (menu>preferences>midi/sync and also the little sync section on the top of the menu page) i tried with both on midi clock or MTC with same frame.... Nothing...!
i decided to test my setup and i can send start and stop at my 303 x0xb0x ....
they both receive midi not from my alesis trigger i/o (the MPC2kxl receive it with midi cable but the Force only receive it connected with the usb cable one the usb port 1 or 2)
I am even more lost dont understand anything haha
I asked myself if there was some incompatibility and i checked on internet in some facebook group and someone told me there was no problem with the midi sync with Force master and MPC2000xl in slave
I have checked again and again the setting and i am 99% sure there are good (1% is the hope i am just stupid and nothing is broken on one of my machine...)
is there anybody here that had the problem to sync these two sisters together?
thanks in advance guys
I am trying to sync my force v3.2 with the 2kxl.
I have try with both slave or master without any result. its years i use the mpc so i know how to setting the midi on it (midi in 1 or 2 for slave and midi out A or/and B for master) and i checked very well the manual for the midi sync on the Force (menu>preferences>midi/sync and also the little sync section on the top of the menu page) i tried with both on midi clock or MTC with same frame.... Nothing...!
i decided to test my setup and i can send start and stop at my 303 x0xb0x ....
they both receive midi not from my alesis trigger i/o (the MPC2kxl receive it with midi cable but the Force only receive it connected with the usb cable one the usb port 1 or 2)
I am even more lost dont understand anything haha
I asked myself if there was some incompatibility and i checked on internet in some facebook group and someone told me there was no problem with the midi sync with Force master and MPC2000xl in slave
I have checked again and again the setting and i am 99% sure there are good (1% is the hope i am just stupid and nothing is broken on one of my machine...)
is there anybody here that had the problem to sync these two sisters together?
thanks in advance guys