EMU- Proteus 2000 help

How do I seperate the sounds for a mix-down on the Proteus 2000?

It tells you how to do this in the manual, but I'll give you the quick hook up. Hit the master button and scroll to mix output, then move down to the channel and hit where you want it routed. On my vintage pro there are only six outs so i can only do six at a time. I do channel one and two to send 1 main, channel 3 and 4 to send 2 sub 1, and then channels 5 and 6 to send 3 sub 2. after that scroll to channel pains while still in the master menu, and pan channel one all the way to the left and two to the right, and then repeat for the rest of the channels. Also very important not to forget is in the master menu under fx mode, you want to change that to bypass or you will get the mixing of channels and here unwanted sounds underneath individual instruments. Hope that helps if not let me know and i can help walk you through it again. Peace!

Good looking man, thats alot of help.