Digi 02 Rack

Hey i have my MPC midis with my Triton and Fantom X module and the outs of everything going into the Digi rack i can hear the sounds and everything but if i hit play on the pro tools i don't hear anything i wanna go from MPC to Rack threw midi but don't know where would i hook up my midis from Triton and Fantom up no space on MPC

ps i did read the books and still didnt know what to do

Thanks

Just to make sure I understand, do you want to sequence In PT or sequence everything in the MPC and record all the audio tracks onto PT?

Yeah i wanna sequence everything on mpc and record on pt

There are a couple of ways you can set things up, I would set it up like this:

MPC Midi out A> Triton Midi in
Triton Midi out > MPC Midi in 1

MPC Mid out B> Fantom Midi in

Digi 002 Midi out> MPC Midi in 2

go here for how to sync it up:

http://www.mpc-forums.com/viewtopic.php?t=18004

Damn man thanks alot for that info good looking out

I forgot to mention that you'll want to connect all the audio outs from your gear to the audio inputs on the 002, this should go without sayin' but.........

Thanks for the info everything worked when hit play on the PT it plays the MPC but no sound i ran that oms program and nothing it didnt find anything

You have to create new AUX tracks in Pro Tools. Create one stereo AUX for each of your instruments, then set the inputs according to the inputs which each of your modules are plugged. So if your MP is hooked up to Line Input 1&2, then set the input for the AUX to 1&2 etc.

You can save a custom template with all your I/O setup so you don't have to recreate the same session every time you launch Pro Tools.

You can also customize you input names by labeling them MPC L&R, Fantom L&R, etc.

Oh okay so i don't need to run that oms then

OMS? Are you still using mac OS 9?

Have to admit, I'm a lil' thrown by the aux track for every audio track thing, I've nevr had to do this. Aux tracks are necessary to record software synths(not always)but not for recording hardware.

The fact that PT is triggering the MPC but you're not getting any sound tells me that you might have the input/output setup wrong. Go to the I/O setup and hit the defalt button for the input section. Hit Option+K and arm a track, hit play on the PT transport, anything? It's been a while since I've used PT on a Mac so I might be missin' somethin but I'll look into what the problem could be.

Yeah i have a mac os and i have the digi rack so i did what you told me cant record that oms is wacked out my midis are hooked up rite so it should detect my mpc and it dont Hey i have beats that i made and saved them on my zipdrive can i load those tracks on pro tools and burn it on cd