Discuss the various methods you use in music production, from compressor settings to equipment type.
By DrunkenBear Sat May 15, 2010 12:12 pm
If i record my beat on tape using some old pioneer deck (i going to get one from my old friend), what will happen with sounding? Will i get the same effect like old mpc's?
PS. I got digital one mpc1000, wich connected directly to the old turntable..
Last edited by DrunkenBear on Sat May 15, 2010 3:28 pm, edited 1 time in total.
User avatar
By peterpiper Sat May 15, 2010 3:52 pm
If you are about glueing the samples together. Thats what happening when you are learn how to mix a song. Its not like : record a **** mix to tape and everything is glued together.

peace
User avatar
By dabmeister Sat May 15, 2010 4:11 pm
Is it an analog sound/effect you're trying to capture? Going through old gear is kinda like a hit or miss scenario. Now if you can get your hands on a old tube pre or just an old pre amp in general, you'll have a better chance at accomplishing what it is you're after.

Some daw programs do have a "tape saturation" effect you can use, but I don't know how good that would be if it were compared to the real thing.
By jimmie Sun May 16, 2010 10:41 pm
Running your sounds hot into tape can give a nice effect, but it depends on the machine ur using. I tried it with a 4-track tascam workstation last week and the noise was ridiculous... totally not worth it.. But it depends on the quality of your tape deck I guess. A 1/4" reel to reel with 15 ips will probs sound good... maybe even 7.5 ips... I don't know too much about tape, but I know I'd like a good reel-to-reel to try out :)
Experimentation is good. Juss do it.
By DrunkenBear Mon May 17, 2010 12:55 pm
i tried to record beat on the tape using new tape and some pioneer media center.. i heard only background noise, maybe snares sounded a bit unusual.. and nothing more.
PS. Other snare sound may caused by old amplifer and preamp.. theyre about 10-15 years old=]
Now i going to find some old soivet synth.. if it will sound nice, i would re-make some my beats using it=\
User avatar
By buddy maxwell Mon May 17, 2010 6:38 pm
Pastor-of-Muppets wrote:
DrunkenBear wrote:witch connected directly to the old turntable..


Image


lolz
User avatar
By Zukan Fri May 21, 2010 1:40 pm
As Jimmie mentioned, and to expand on it, the tape heads, the tape itself and how you drive it are factors to consider.

If all you want is some type of saturation effect then there are some half decent plugins out there that can work well.

If you are after low bit resolution then that can be achieved with 8-12 bit samplers.

If you fancy white noise then go down the cassette route..

Options, options, options..........