?`s for the vets !

can someone walk me through the process of hooking my trition pro to my mpc2000xl. i want to make beats on the mp and play the keys on the triton.

I've noticed this question poppin up alot.. search the forums.

maybe there needs to be either a triton+mpc setup sticky message (tutor???), or a forum dedicated to triton+mpc users. HA

No offense, but if you can't hook up your audio and midi connections, you just haven't done your homework.

Check your post on the Studio enviorments. I got you covered.
Also run a search for any questions you have prior to posting.

In order to play the triton and the MPC so you are using the MPC as the sequencer and playing the TRITON keys, you need a DJ Mixer (or mixing board) and 2 MIDI cables. Take the outputs (RCA Wire) for both machines and plug them into your channels on the mixer or mixing board. Now take your MIDI cables and go from the MIDI IN on your MPC, to the MIDI OUT on the Triton. Take the second MIDI cable and go from the MIDI IN on the Triton to the MIDI OUT on the MPC.

It's basically OUT to IN, IN to OUT for each machine, but you NEED 2 cables, not just one. Now you can use the machines for what you were talking about. Everything will be heard through the mixer though, do not look at each machine or have headphones in one or the other because it wont work. Use the headphones and plug them into your mixing board or DJ mixer, I use a DJ mixer but a "MIXER" period will work.

Good luck and have fun!

Basic set up to any keyboard/module is covered by the MIDI tutorial on the site.