Discuss the various methods you use in music production, from compressor settings to equipment type.
By prospect Tue Mar 06, 2007 6:11 am
(taken from http://forum.defected.com/viewtopic.php ... ompression )

Legendary NYC Style bus compression - a technique that started in Rock and was handed down to Hip Hop, House and beyond.

1: Create a Group Channel Track (Cubase) or Bus (Logic) called 'Drums'
2: Route the output of all drum sounds to this 'Drums' Fader instead of the master
3: Create an additional GCT/BUS and call it 'NYC' or 'Fatness' and bring the fader right down so it cant be heard.
4: Send from the 'Drums' GCT/BUS into 'NYC' 100% (fx send on cubase/aux send on Logic)
5: Now on the 'NYC' GCT/BUS add the following Inserts with settings as stated:

i1) Compressor: Peak Mode, Ratio about 8:1, Attack 5ms, Release 150ms or Auto, Threshold set so that about -10dB gain reduction.

i2) EQ: Low Shelf boost of +6dB @ 100 Hz, High Shelf Boost +6dB @ 10kHz

6: Bring the NYC fader up slowly.... Fatness happens!

This technique should be used with care - if you use too much of it you may not have enough headroom to fit the rest of your track. If you want to hear it in action listen to Ballistica - it's all over the beats.

It can also be used with other sounds for fattening - including vocals.

For an elaborate discussion on this check out; http://www.logicprohelp.com/viewtopic.p ... =nyc+drums


My mixes have improved significantly by using elements from this method in different variations.
User avatar

By rickrock305 Tue Mar 06, 2007 3:52 pm
best mix technique EVER!!!!
User avatar

By Samplecraze Tue Mar 06, 2007 4:03 pm
Another old school technique that gets the NY rename. :wink:
User avatar

By rickrock305 Tue Mar 06, 2007 7:23 pm
Samplecraze wrote:Another old school technique that gets the NY rename. :wink:



its been known as NY compression for a LONG time.

i like the term parallel compression better, its a bit more descriptive.
User avatar

By krang Wed Mar 07, 2007 4:46 am
Another old school technique that gets the NY rename


word, its called ny compression cuz thats where it came from. back in the day a lot of engineers mixing styles were influenced by where they lived.
User avatar

By mp3 Wed Mar 07, 2007 4:56 am
I heard it was invented in Motown.
User avatar

By sinister_keys Wed Mar 07, 2007 7:11 pm
rickrock305 wrote:
Samplecraze wrote:Another old school technique that gets the NY rename. :wink:



its been known as NY compression for a LONG time.

i like the term parallel compression better, its a bit more descriptive.
User avatar

By EMFinite Wed Mar 07, 2007 7:44 pm
good post...

thanks!

8)
User avatar

By muscle Thu Mar 08, 2007 9:26 am
nice im going to try this. thanks