Discuss the various methods you use in music production, from compressor settings to equipment type.
User avatar
By caveman86 Wed Apr 23, 2008 6:19 pm
Whats the best way to lay a bass-line? What do you need to be able lay the bass-guitar sequence over the melody that you have made on a MPC2000???

pardon the bad grammar!!!

Thanks
User avatar
By texasrida1 Wed Apr 23, 2008 7:13 pm
You can midi the mpc to a pc with Reason on it and use the mpc to trigger the bass sounds and record the played instrument into a multitrack or a DAW. There you have it, I know there's other ways but thats the way I do it.
By nanoloop Wed Apr 23, 2008 10:35 pm
sample a note into the mp, chop and trim to loop, 16 levels. be done with it.
By brainstorm Sat Apr 26, 2008 10:02 pm
nanoloop wrote:sample a note into the mp, chop and trim to loop, 16 levels. be done with it.


yeah thats makes for a nice bass sound that'll play as long as you hold it
User avatar
By Maxillaa Sat Apr 26, 2008 11:12 pm
I think 16 levels is really slept on...with bass samples it makes the mpc a stronger weapon.
User avatar
By ramal38 Sun Apr 27, 2008 9:10 pm
Maxillaa wrote:I think 16 levels is really slept on...with bass samples it makes the mpc a stronger weapon.
yes it does
User avatar
By rinseout Mon Apr 28, 2008 12:41 am
Who needs 16 levels? JJ OS GPE is the shit :twisted:
User avatar
By Maxillaa Mon Apr 28, 2008 11:40 am
on my 2000 classick.........
User avatar
By DougWonder Mon Apr 28, 2008 1:43 pm
lol and yes 16 levels does the trick
User avatar
By talontsiawd Fri May 02, 2008 7:39 am
For some reason, i couldn't deal with 16 levels with my mpc. I think it's because i'm used to a keyboard. Anyway, what i did was load up bass loops from soundbanks from programs (acid pro, reason) or records that just had base. Then i chopped them up and made programs. Then i could take that and just pitch (like 16 levels basically), but have the notes in an order that was more logical for me interms of playing. Or just taking one sound and pitching it yourself across like 3-4 pad. I just hate being all of the pads, it just simplifies it and takes only like 1-2 min.
User avatar
By Menco Sat May 03, 2008 12:09 pm
caveman86 wrote:sample a note into the mp, chop and trim to loop, 16 levels. be done with it.


Instead of the 16 level function I make a whole bass program from one sampled note. Then you have 64 bass notes (or less) in each program. Adjust the pitch so you have a keygroup of 64 keys based on one sample. Set the note assign in program mode, plug in a midi keyboard and you can play the bass with keys. That's how I do it sometimes
By Meex Productions Sun May 04, 2008 5:59 pm
just use a keyboard. For me some of the lower notes on bass are hard to hear if you are on key. At least with a keyboard you can "see" the key you are in and make sure you are not throwing out notes that dont exist for the song. The problem with doing bass on an mpc is that the way the pads are laid out say on the 1k. 4 X 4. It makes musical sense if you are only using major scales, because they are 8 notes. 1 entire scale will be spread out across 8 pads, which makes sense. But what about if the song is in a 7 note scale? Like a blues/ pentatonic, etc. Now its hard to make sense of where to press the notes (graphically) on the mpc. I mean it can be done, but by the time you arrange the bass notes to pads that make sense to you, you will have already made your bassline if you used a keyboard.