Does your 1000 wobble on a flat surface?

hey guys, i just got a used MPC 1000 and i noticed that when placed on a flat surface, one of the rubber feet dont completely touch the surface so it becomes wobbly. it seems like each foot is the same height...does anyone know what could be wrong here? i want to fix this problem without having to do something ghetto like stick paper underneath it or something...i mite have to sand some of the feet down. but does anyone have any other ideas?

Only when that Fat Cow comes throught the Door.

haha what?

Mine did a bit. I had to put about 4 adhesive dots on the rear right and it leveled back out.

i just stuck a guitar pick under mine

im gona try to get new rubber feet or sand the existing ones down. hopefully that willl work. uthink itll be worth contacting akai? maybe they havea fix in palce? cu zhonestly a wobbly brand new machine is bullshit, haha

contact akai

not gonna get you anywhere bro, best bet is to fix it yourself.

arite guys, i got some sand paper and sanded down the feet of my mpc to make it level. now it sits perfectly level on any surface with no wobble! its a very easy fix. i used 100grit sandpaper and just rubbed it down with my hands. i also used some 60 grit to make the process faster, and some 150 grit to smooth it out a bit. try it out, its better tahn having to stick somethin underneath everytime u wana make a beat!

Just take the feet off go to a hardware store purchase adhesive rubber hardwood floor protectors.It worked for me.
Really contact akai?After all the turmoil of dead pads do you really think they will send you new feet (and a level).

i got a 4"x2"x2" PSU for my external cdrom under it, about 10% of the MP is on it. angles it nicely so you can see the screen with getting neck ache, doesn't wobble like that. certainly didn't when flat

Mine doesn't the previous owner super glued a completely different leg for my mpc.

mine wobbles when i use lfo