Post your questions, opinions and reviews of the MPC1000. This forum is for discussion of the OFFICIAL Akai OS (2.1). If you wish to discuss the JJ OS, please use the dedicated JJ OS forum
By topshelf3d Fri Oct 01, 2010 1:07 am
Everything is hooked up and i can record into my mpc1000(jj0s4.99) but everything is heavily distorted. i turned the rec gain down and it still the same, turned the threshold up and down. played around with all of it. any pointers?

thanks board
User avatar
By Tapuno Fri Oct 01, 2010 2:14 am
get a beter pre. Art has one for like 40 bucks with a cutoff switch. It sounds hella good too, for a cheepo pre. Cutoff should help with distortion. Also, what kinda deck is it? what kinda Needle? all these could be factors.
By topshelf3d Fri Oct 01, 2010 2:31 am
yeah its a ion cheap usb turntable. 901 needle it sounds good coming through my moniters, just not into the mpc from the pre, i spent 25 on it, which isnt to cheap but i know theres better. any chance there is settings of any kind on the mpc?
User avatar
By Tapuno Fri Oct 01, 2010 2:39 am
if its an Ion usb, shouldn't need a preamp. Thats where the distortion is coming froim, those have built in pre's. Pre on pre equals overdrive. See if you get a better signal running the turntable directly to the MPC
By topshelf3d Fri Oct 01, 2010 5:49 am
oh i see makes sense for coverting.... so just the 1/4 stereo plug to the "y" rca females?
User avatar
By Tapuno Fri Oct 01, 2010 5:56 am
don't need a y wire. Just RCA to 1/4" jacks