Post your questions, opinions and reviews of the MPC1000. This forum is for discussion of the OFFICIAL Akai OS (2.1). If you wish to discuss the JJ OS, please use the dedicated JJ OS forum
By joeking Sat Mar 29, 2014 11:15 pm
howdy folks
my cf reader pins were damaged today meaning I can no longer save or load so I will need either new cf reader board or a hdd kit,

I am currently using the free jjos , will i be able to install an hdd kit and upgrade to os2xl without a compact flash card working?
By 313 studio tricks Sun Mar 30, 2014 5:49 am
you can replace the CF card reader board inside your mpc. you might be able to bend pins back. i have once a long time ago and it worked.
By joeking Sun Mar 30, 2014 3:53 pm
yeah I checked the replacement part but at almost the same price as a hd kit I reckon the hd would be the safer/best option,

wont be needing either though as I straightend the pins last night :-D
took my time with a tiny flat head screwdriver and its working again.
By dexnefex Thu Sep 18, 2014 10:20 am
The CF slot on these things is junk, I was buying and repairing these for awhile and 50% of them were damaged CF pins. If you get lucky you can bend them back. If you play with them too much they just break.
I was lucky enough to be working for a tech shop and one of the techs was able to replace it for me, but we had all the good equipment. Some laptop/computer repair shops will replace them for you for around $50.
Such a pain.