I'll try to send you photos at least.
Actually it doesn't work, as I share the same SCSI2SD V6 with an Emu e5000. (on different scsi ID )
I ordered a SCSI2SD V5.1, to plug it exclusively on the ARSX pro (externaly first, because internally is not so easy)
## edit 2018-09-27 ##
## The following procedure works with scsi2sd V6 ##
What you need, and need to know :
• 1 usb cable + power adapter to power up the device :
Some samplers supply power via scsi ribbon cable, as the Emu. Asr-x don't.
• You need an adapter to add an scsi plug on the back of the scsi2sd
Scsi2sd is '50-way' or '50-pin', try to find something that fits to your cable : DB25 (iomega zip size), Centronic (big scsi-1 size)..
For example, something like that
http://amigakit.amiga.store/product_inf ... ts_id=1290• A box to fit scsi2sd inside. You can find 3d printed boxes online, I used a wood box.
• An sd card. 8gb will be perfect as you'll can't format partition >2go
Connect SCSI2D to your mac/pc to setup 4 2gb virtual drive
Take care to not use the same scsi ID on your ASR and the 4 virtual drive
Plug scsi2sd to ASRx via you cable
Power up Scsi2sd first always
Power up ASRx
Go to disk preferences
Format each SCSI id
It works.
## edit detailed behaviour with V6
Now (with scsi2sd v6),
when connecting the scsi2sd board to your Mac/pc via USB, the 4 virtual drives will mount on your desktop.
the sd card will be readable/writable on your Mac/pc, as it's FAT32 formated.