By aug_chord
Wed May 08, 2019 6:31 pm
Hi, new member here.
So, I'm trying to figure out to install a new backlight for my S900 (which I've never actually used before). The old Telesis instructions are unclear, but I've included a pic here to help ask my question.
I know that I have to solder 1) (the inverter power leads) to 2) the copper contacts on the new backlight . But I am also supposed to have these also soldered to 3) the display card? My display card does have old solder on this display card, but when I removed everything,there was nothing actually soldered to it (of course, it's possible the solder could have come undone).
I did solder 1) and 2) together, which did get the backlight going. However, there was text, and I don't know if that an issue with the unit itself or if all three things have to be soldered together.
So, I'm trying to figure out to install a new backlight for my S900 (which I've never actually used before). The old Telesis instructions are unclear, but I've included a pic here to help ask my question.
I know that I have to solder 1) (the inverter power leads) to 2) the copper contacts on the new backlight . But I am also supposed to have these also soldered to 3) the display card? My display card does have old solder on this display card, but when I removed everything,there was nothing actually soldered to it (of course, it's possible the solder could have come undone).
I did solder 1) and 2) together, which did get the backlight going. However, there was text, and I don't know if that an issue with the unit itself or if all three things have to be soldered together.