hunterestrada wrote:Hey dickhead can u just tell me what to do.
Ok:
http://www.akaipro.com/stuff/contentmgr/files/0/d46fecbf812e639125e2553b3f13172e/file/mpc500_reference_manual_revc.pdfPage 106:
Initialize To Factory Default Various Sample and Sequence settings can be saved to Compact Flash when the file is saved. The global settings found in the MPC500
(listed below) are saved to the internal Flash Memory and stored when the MPC500 is turned off. You can re-initialize the Factory Preset
settings using the following procedure.
1. Turn the MPC500 on while holding the [ERASE / UNDO] button.
2. Release the [ERASE / UNDO] button after the display shows [MPC500 (##MB installed)].
Now the MPC500 is reset to the Factory Preset settings. The following global settings are stored in the MPC500:
Timing Correct (Note value, Swing%)
Click/Metronome (Count in, Rate, In play, In rec)
Step Edit Options (Auto step increment, Duration of recorded notes)
Active track receive channel
Soft thru
Sync in
Sync out
Master level
Sustain pedal to duration
Truncate dura
Tap average
Autoload
Another time, please read the manual.
I just used a little peace of my life on you, in which i could have done some awesomly cool things.