List of Working/Non Working Class Compliant USB Interfaces

groslaine wrote:I can confirm the Audient EVO 16 work. But you have to configure it with the PC and MAC software/driver before. You need to set it to 44.1 for sample rate. And you can configure the output while your in the software if you want. Once it's done make sure to click on "store standalone state" to save the setting to the internal memory of the evo.
Now I dont use any computer, just my MPC live 2 and the Evo16. Work like a charm (no crack and pop, no distorsion) if you set it right.
Best audio interface for now, I dont regret my motu.

appreciate that mate, I hear the same from various channels... you lose main output volume control but that can be addressed

TC Helicon Perform VK: doesn't want to operate at 44100, so --> doesn't work.

AUDIO DEVICE ERROR
Error:44100 may not be a supported sample rate on the external device.
Code:-22

allen heath cq18-t doesn't work (is a class compliant interface but only 48khz/96khz not 44100)

Has anyone tried to connect the Roland SH-4D via USB audio? 5 stereo channels + 1 main mix?

Hi,
I'm looking at getting a Behringer XR 18 to use with my mpc as well as on the mac. I was wondering if anyone here has tried the XR18 with MPC 3, if it's still supported? Excited about disk streaming and hopefully it be able to playback 8 or more audio tracks.

Vaksa wrote:Arturia audiofuse 16rig no go.
Device hard switching to 192 kHz from 44 kHz when connecting to mpc and option switch back to 44 greyed out. Mpc see it, but returns -22 error when trying to switch to it.

Huge bummer, I was hoping to see it work and try and do some multitrack recording of my synths in the new 3.0 arranger,` but I got the same error

iConnectMIDI2+ gets recognized by KEY 37 with all DIN & USB ports.
Haven't tried the USB Audio to PC yet. (08/2024)

I wonder if the Antelope Audio Zen Quadro works too. What's interesting is that there are two USB ports. It would be cool if you could operate a computer and MPC at the same time and use the Dsp core engine ad well

Does anybody have an idea if Apollo Solo usb works smoothly with the mpc software?

Lol, Roland Aira J-6 shows up on the MPC One as an external audio interface. Also on Android... Roland Aira devices seem in practice more class-compliant than Roland advertises.

Antelope Audio Zen Quadro is working fine. Usb 1 full channel, need to be switch from 192khz to 44khz. Usb 2 supporting 2 channels. Can be user parallel with PC but if connected usb 1 to mpc and usb 2 to pc or mac, mixer panel cannot be startet. Of would be nice if we can change vfx effects on this way. But ones conifgured the effects don't gonne, an can be user with microphone and so on.

^^^
Bot, perhaps?

Midiplus/Miditech MIDI interfaces work great. I have a 16 port and an 8 port, either works with my MPC X.

(Haven't actually tried both at the same time, maybe I'll try it someday.)

RME UFX II has been working nicely for me.
Been using it for 2 years.

Iconectivity audio4c only works for a few minutes and starts to make screeching sounds after a while..

Can't imagine paying another $2800 to use in 44.1K to get outputs in standalone..