problem with cursor \\\\\

Technical questions for the MPC2000xl and the MPC2000
 Reply Share on Facebook
User avatar

problem with cursor \\\\\

By GENUINO Sun Aug 31, 2003 3:09 pm
hi\ once again
i would like to explain my new problem.
now sometimes when i press the down cursor it doesn\t work, then i must touch it and press it in differents directions and ways until it works... it\s very strange, somebody knows what i can to do to get a definitive solution.
thankz very muchhh..
paz.
:?

www.cantinelafina.com

ByMario Mon Sep 01, 2003 1:58 pm
that exact same sing happens to me too....
User avatar

By GENUINO Mon Sep 01, 2003 2:30 pm
solutions????
mercy.

By elmacaco Mon Sep 01, 2003 4:01 pm
your button is worn out, you need a replacement. you could try one of those ir blowers it might help if the issue is dust.

By mpc3000 Tue Sep 02, 2003 4:34 am
elmacaco is right, but I would get it replaced right away. Those who don't end up breaking the $3 plastic cover on top of the 60 cent switch. That will automatically double the bill at any repair shop.
User avatar

try this...

By dj e.d.e Tue Sep 02, 2003 5:10 am
try useing a contact cleaner, NOT WD-40 contact cleaner solvent use this on my mixers x-fader and to clean static on my volumes controls.

contact cleaner dry's fast as to WD-40 leaves afilm.

you could probably pick a can up at your local computer store or try guitar center dending on where you may live.

By elmacaco Tue Sep 02, 2003 7:03 am
Contact cleaner is not good to use on buttons. Faders are a different thing altogether,

You can really **** up your MP by spraying anything into the buttons.
User avatar

By Swissmaster Cheese Tue Sep 02, 2003 7:06 am
Just cop you a can o' some compressed air, yow mean, mane?
 Reply
Return to MPC2000xl, MPC2000