New to the MPC production world? Got a music production question that's not really specific to any particular MPC? Try your luck here and get help from our experienced members.
By king360 Mon Feb 06, 2006 4:01 pm
Can anyone give me a brief explanation on why no sound is coming from the triton after being recorded in the song mode on the mpc?
User avatar

By Jacpot Mon Feb 06, 2006 5:40 pm
You need to plug the keyboards outs into the mixer as well as the mpc. And make sure your midi connections are right.


*Midi doesnt transmit sound
User avatar

By M.ic P.ro C.rusher Mon Feb 06, 2006 6:27 pm
Do you have the out of the triton to the in on the MPC AND the out of the MPC to the in on the Triton?

To record on the MPC, the Triton need to output to it (Triton out to MPCin)
For the MPC to trigger the recorded notes on the Triton, the MPC need to be outputted to the Triton (MPC out to Triton in)
User avatar

By Mr modnaR Mon Feb 06, 2006 6:44 pm
M.ic P.ro C.rusher wrote:Do you have the out of the triton to the in on the MPC AND the out of the MPC to the in on the Triton?

To record on the MPC, the Triton need to output to it (Triton out to MPCin)
For the MPC to trigger the recorded notes on the Triton, the MPC need to be outputted to the Triton (MPC out to Triton in)


but you also need the triton to be connected to a mixer so you can hear it.
By king360 Mon Feb 06, 2006 7:16 pm
Maybe I should clarify, I can hear the triton when I am in sequence mode but when I resample and record a song that is when I dont hear the triton sounds.
User avatar

By Mr modnaR Mon Feb 06, 2006 7:18 pm
resample the triton back into itself? or sample the triton into the mpc?
User avatar

By Lampdog Mon Feb 06, 2006 7:29 pm
I'm lost, I was trying to follow along but not enough info about the WHOLE setup is being dropped.
User avatar

By Mr modnaR Mon Feb 06, 2006 7:31 pm
blind leading the completely and utterly sightless.

By king360 Tue Feb 07, 2006 12:11 am
I have everything connected to the mixer and midi etc.....
I can hear the triton sounds in sequences.....
I cannot when the sequences are converted to song mode...
User avatar

By Jacpot Tue Feb 07, 2006 12:29 am
king360 wrote:I have everything connected to the mixer and midi etc.....
I can hear the triton sounds in sequences.....
I cannot when the sequences are converted to song mode...


oh!!! i know what u mean. Happend to me a few times matter of fact. The mpc acts strangely sometimes with synths. Like it wont show all the notes in step edit either. Not all the time but it happens sometimes.

I just use the Next sequence button to get around this. Song mode does do that sometimes though