MPC1000 most wanted features.

tank wrote:The objective of this thread is to get feedback from mpc1000 users about the features they miss most. This would help developers (Akai and/or those developing inpedendent operating systems) to decide wich features to give priority in the development process. (Note: features already implemented in OS version 3.x don't need to be included in this list).
I will keep the list updated and I'll try to have it in order (from most wanted to less).

- MTC & MMC (as in mpc2500 os 1.2)
- Auto-chromatic programs: assign a sample to all pads with chromatic midi notes and tune (as in mpc2500 os 1.2)
- Recordable track mutes (as in mpc2500 os 1.2)
- More settings in Mode 11: LFO, envelope, mutes, etc.
- Preview sounds from disk (in load mode) while playing a sequence
- Show note duration in grid edit (with visual bars)
- Screensaver
- Individual filters per pad layer (if possible to keep sample acurate)
- Individual envelopes per pad layer (if possible to keep sample acurate)
- Trim mode > Edit: insert sound (like in older mpc's)
- Grid mode: show bar/step info
- Full ADSR envelopes support
- Qlink sliders send cc messages through midi in realtime and record them
- Swing shift timming: ability to choose elarlier or later (like in older mpc's)
- Real-time modulation of loop points (with a MIDIvalue, LFO or ENV)
- Tap tempo: tap averaging up to 8, 12 or 16
- Ability to move/rearrange regions in chop mode

I will keep updating this list based on the feedback. Wich features to you miss most?

yo dude if you want that then cop a mpc2500.. duh man,,,. dont be ignorant and want things that you can paya little more for.. dont cheat us.. and play us out fo rare money that we spent just for an os like that.. get your money up pimp

dollabillbeats wrote:

tank wrote:The objective of this thread is to get feedback from mpc1000 users about the features they miss most. This would help developers (Akai and/or those developing inpedendent operating systems) to decide wich features to give priority in the development process. (Note: features already implemented in OS version 3.x don't need to be included in this list).
I will keep the list updated and I'll try to have it in order (from most wanted to less).

- MTC & MMC (as in mpc2500 os 1.2)
- Auto-chromatic programs: assign a sample to all pads with chromatic midi notes and tune (as in mpc2500 os 1.2)
- Recordable track mutes (as in mpc2500 os 1.2)
- More settings in Mode 11: LFO, envelope, mutes, etc.
- Preview sounds from disk (in load mode) while playing a sequence
- Show note duration in grid edit (with visual bars)
- Screensaver
- Individual filters per pad layer (if possible to keep sample acurate)
- Individual envelopes per pad layer (if possible to keep sample acurate)
- Trim mode > Edit: insert sound (like in older mpc's)
- Grid mode: show bar/step info
- Full ADSR envelopes support
- Qlink sliders send cc messages through midi in realtime and record them
- Swing shift timming: ability to choose elarlier or later (like in older mpc's)
- Real-time modulation of loop points (with a MIDIvalue, LFO or ENV)
- Tap tempo: tap averaging up to 8, 12 or 16
- Ability to move/rearrange regions in chop mode

I will keep updating this list based on the feedback. Wich features to you miss most?

yo dude if you want that then cop a mpc2500.. duh man,,,. dont be ignorant and want things that you can paya little more for.. dont cheat us.. and play us out fo rare money that we spent just for an os like that.. get your money up pimp

uhhh no. why would i sell my 1k and get 2500 when akai could just not be retarded and put some key features in the OS that should be there in the first place. That the 2500 might not even have. Doesn't make sense to spend the extra money. I cant justify the price difference between the 2500 and 1k with the prices of a used 1k so good these days.

How bout we just wish for a BUG Less System :roll:

japspecvr6 wrote:How bout we just wish for a BUG Less System

amen

StonesThrow wrote:

dollabillbeats wrote:

tank wrote:The objective of this thread is to get feedback from mpc1000 users about the features they miss most. This would help developers (Akai and/or those developing inpedendent operating systems) to decide wich features to give priority in the development process. (Note: features already implemented in OS version 3.x don't need to be included in this list).
I will keep the list updated and I'll try to have it in order (from most wanted to less).

- MTC & MMC (as in mpc2500 os 1.2)
- Auto-chromatic programs: assign a sample to all pads with chromatic midi notes and tune (as in mpc2500 os 1.2)
- Recordable track mutes (as in mpc2500 os 1.2)
- More settings in Mode 11: LFO, envelope, mutes, etc.
- Preview sounds from disk (in load mode) while playing a sequence
- Show note duration in grid edit (with visual bars)
- Screensaver
- Individual filters per pad layer (if possible to keep sample acurate)
- Individual envelopes per pad layer (if possible to keep sample acurate)
- Trim mode > Edit: insert sound (like in older mpc's)
- Grid mode: show bar/step info
- Full ADSR envelopes support
- Qlink sliders send cc messages through midi in realtime and record them
- Swing shift timming: ability to choose elarlier or later (like in older mpc's)
- Real-time modulation of loop points (with a MIDIvalue, LFO or ENV)
- Tap tempo: tap averaging up to 8, 12 or 16
- Ability to move/rearrange regions in chop mode

I will keep updating this list based on the feedback. Wich features to you miss most?

yo dude if you want that then cop a mpc2500.. duh man,,,. dont be ignorant and want things that you can paya little more for.. dont cheat us.. and play us out fo rare money that we spent just for an os like that.. get your money up pimp

uhhh no. why would i sell my 1k and get 2500 when akai could just not be retarded and put some key features in the OS that should be there in the first place. That the 2500 might not even have. Doesn't make sense to spend the extra money. I cant justify the price difference between the 2500 and 1k with the prices of a used 1k so good these days.

then y the **** did i spend 1800 on a mp when the 1000$ mpc1000 has better or same features?.. thats cheating the game...ask akai that.. i asked them the same shyt bro...if they are gonn amek an os thats like the 4000 or 2500 and they said no.. i spoke to a akai representitive one on one.. not no phone convo.. real talk..

dollabillbeats wrote:

StonesThrow wrote:

dollabillbeats wrote:

tank wrote:The objective of this thread is to get feedback from mpc1000 users about the features they miss most. This would help developers (Akai and/or those developing inpedendent operating systems) to decide wich features to give priority in the development process. (Note: features already implemented in OS version 3.x don't need to be included in this list).
I will keep the list updated and I'll try to have it in order (from most wanted to less).

- MTC & MMC (as in mpc2500 os 1.2)
- Auto-chromatic programs: assign a sample to all pads with chromatic midi notes and tune (as in mpc2500 os 1.2)
- Recordable track mutes (as in mpc2500 os 1.2)
- More settings in Mode 11: LFO, envelope, mutes, etc.
- Preview sounds from disk (in load mode) while playing a sequence
- Show note duration in grid edit (with visual bars)
- Screensaver
- Individual filters per pad layer (if possible to keep sample acurate)
- Individual envelopes per pad layer (if possible to keep sample acurate)
- Trim mode > Edit: insert sound (like in older mpc's)
- Grid mode: show bar/step info
- Full ADSR envelopes support
- Qlink sliders send cc messages through midi in realtime and record them
- Swing shift timming: ability to choose elarlier or later (like in older mpc's)
- Real-time modulation of loop points (with a MIDIvalue, LFO or ENV)
- Tap tempo: tap averaging up to 8, 12 or 16
- Ability to move/rearrange regions in chop mode

I will keep updating this list based on the feedback. Wich features to you miss most?

yo dude if you want that then cop a mpc2500.. duh man,,,. dont be ignorant and want things that you can paya little more for.. dont cheat us.. and play us out fo rare money that we spent just for an os like that.. get your money up pimp

uhhh no. why would i sell my 1k and get 2500 when akai could just not be retarded and put some key features in the OS that should be there in the first place. That the 2500 might not even have. Doesn't make sense to spend the extra money. I cant justify the price difference between the 2500 and 1k with the prices of a used 1k so good these days.

then y the **** did i spend 1800 on a mp when the 1000$ mpc1000 has better or same features?.. thats cheating the game...ask akai that.. i asked them the same shyt bro...if they are gonn amek an os thats like the 4000 or 2500 and they said no.. i spoke to a akai representitive one on one.. not no phone convo.. real talk..

uhh yeah i beleive that for about one second akai wouldn't make an appointment for god himself.

StonesThrow wrote:

dollabillbeats wrote:

StonesThrow wrote:

dollabillbeats wrote:

tank wrote:The objective of this thread is to get feedback from mpc1000 users about the features they miss most. This would help developers (Akai and/or those developing inpedendent operating systems) to decide wich features to give priority in the development process. (Note: features already implemented in OS version 3.x don't need to be included in this list).
I will keep the list updated and I'll try to have it in order (from most wanted to less).

- MTC & MMC (as in mpc2500 os 1.2)
- Auto-chromatic programs: assign a sample to all pads with chromatic midi notes and tune (as in mpc2500 os 1.2)
- Recordable track mutes (as in mpc2500 os 1.2)
- More settings in Mode 11: LFO, envelope, mutes, etc.
- Preview sounds from disk (in load mode) while playing a sequence
- Show note duration in grid edit (with visual bars)
- Screensaver
- Individual filters per pad layer (if possible to keep sample acurate)
- Individual envelopes per pad layer (if possible to keep sample acurate)
- Trim mode > Edit: insert sound (like in older mpc's)
- Grid mode: show bar/step info
- Full ADSR envelopes support
- Qlink sliders send cc messages through midi in realtime and record them
- Swing shift timming: ability to choose elarlier or later (like in older mpc's)
- Real-time modulation of loop points (with a MIDIvalue, LFO or ENV)
- Tap tempo: tap averaging up to 8, 12 or 16
- Ability to move/rearrange regions in chop mode

I will keep updating this list based on the feedback. Wich features to you miss most?

yo dude if you want that then cop a mpc2500.. duh man,,,. dont be ignorant and want things that you can paya little more for.. dont cheat us.. and play us out fo rare money that we spent just for an os like that.. get your money up pimp

uhhh no. why would i sell my 1k and get 2500 when akai could just not be retarded and put some key features in the OS that should be there in the first place. That the 2500 might not even have. Doesn't make sense to spend the extra money. I cant justify the price difference between the 2500 and 1k with the prices of a used 1k so good these days.

then y the **** did i spend 1800 on a mp when the 1000$ mpc1000 has better or same features?.. thats cheating the game...ask akai that.. i asked them the same shyt bro...if they are gonn amek an os thats like the 4000 or 2500 and they said no.. i spoke to a akai representitive one on one.. not no phone convo.. real talk..

uhh yeah i beleive that for about one second akai wouldn't make an appointment for god himself.

dude aight my friends buddy works for akai.. ight there ya go.. nah i aint lying.. ight.. i asked him on his free time.. and yea i no that as well.. any akai representivive wouldnt make an apoinment for just anyone.. but it wasnt an oppiontment

dollabillbeats wrote:

StonesThrow wrote:

dollabillbeats wrote:

StonesThrow wrote:

dollabillbeats wrote:

tank wrote:The objective of this thread is to get feedback from mpc1000 users about the features they miss most. This would help developers (Akai and/or those developing inpedendent operating systems) to decide wich features to give priority in the development process. (Note: features already implemented in OS version 3.x don't need to be included in this list).
I will keep the list updated and I'll try to have it in order (from most wanted to less).

- MTC & MMC (as in mpc2500 os 1.2)
- Auto-chromatic programs: assign a sample to all pads with chromatic midi notes and tune (as in mpc2500 os 1.2)
- Recordable track mutes (as in mpc2500 os 1.2)
- More settings in Mode 11: LFO, envelope, mutes, etc.
- Preview sounds from disk (in load mode) while playing a sequence
- Show note duration in grid edit (with visual bars)
- Screensaver
- Individual filters per pad layer (if possible to keep sample acurate)
- Individual envelopes per pad layer (if possible to keep sample acurate)
- Trim mode > Edit: insert sound (like in older mpc's)
- Grid mode: show bar/step info
- Full ADSR envelopes support
- Qlink sliders send cc messages through midi in realtime and record them
- Swing shift timming: ability to choose elarlier or later (like in older mpc's)
- Real-time modulation of loop points (with a MIDIvalue, LFO or ENV)
- Tap tempo: tap averaging up to 8, 12 or 16
- Ability to move/rearrange regions in chop mode

I will keep updating this list based on the feedback. Wich features to you miss most?

yo dude if you want that then cop a mpc2500.. duh man,,,. dont be ignorant and want things that you can paya little more for.. dont cheat us.. and play us out fo rare money that we spent just for an os like that.. get your money up pimp

uhhh no. why would i sell my 1k and get 2500 when akai could just not be retarded and put some key features in the OS that should be there in the first place. That the 2500 might not even have. Doesn't make sense to spend the extra money. I cant justify the price difference between the 2500 and 1k with the prices of a used 1k so good these days.

then y the **** did i spend 1800 on a mp when the 1000$ mpc1000 has better or same features?.. thats cheating the game...ask akai that.. i asked them the same shyt bro...if they are gonn amek an os thats like the 4000 or 2500 and they said no.. i spoke to a akai representitive one on one.. not no phone convo.. real talk..

uhh yeah i beleive that for about one second akai wouldn't make an appointment for god himself.

dude aight my friends buddy works for akai.. ight there ya go.. nah i aint lying.. ight.. i asked him on his free time.. and yea i no that as well.. any akai representivive wouldnt make an apoinment for just anyone.. but it wasnt an oppiontment

it was a figure of speech...

could you geniuses stop quoting each other AND every other motherfukker who has posted here

i mean
unless you need a recap every time you post

i think it looks pretty

Cap_Ill wrote:i think it looks pretty

Yeah, I was about to comment that this is the prettiest looking pointless argument we've had round here for a while.

i want to be able to control things in the mpc... filters,effects, with knobs on my midi controller.....

Already implemented in new os version 1.0:
- MTC & MMC (as in mpc2500 os 1.2)
- Auto-chromatic programs: assign a sample to all pads with chromatic midi notes and tune (as in mpc2500 os 1.2)
- Recordable track mutes (as in mpc2500 os 1.2)
- More settings in Mode 11: LFO, envelope, mutes, etc.
- Swing shift timming: ability to choose elarlier or later (like in older mpc's)

Yeah!

the ability to link pads would be dope!

so crucial for taking a drum and adding that
same drum filtered differently (like with a lo pass).
thickens up your drums so nicely.

its such a classic, easy technique on older mp's that its
a shame that its a bit more of a pain in the ass to do on the 1000.

I'd like to see:

- Note on release.
- Edit note parameters in grid edit (select note-hit window and being able to change durations-velocity-you name it etc.)