only stereo out in the mixer?

Post your views and questions about the Akai MPC2500
 Reply Share on Facebook
User avatar

By Upright Sat Dec 09, 2006 5:59 am
Why can't you?? Are you saying instead of having the output read 1/2 you want it to read 1 right??
User avatar

By Lampdog Sat Dec 09, 2006 2:22 pm
Page 91, 2500 manual, do this not work?

You can change the setting by turning the DATA wheel.

ST The pad will be output to the stereo out.
1/2 The pad will be output to the assignable
mix out 1/2.
3/4 The pad will be output to the assignable
mix out 3/4.
5/6 The pad will be output to the assignable
mix out 5/6.
7/8 The pad will be output to the assignable
mix out 7/8.
Tips : The output setting is made in stereo pairs. If you wish to
output eight monaural signals separately from the eight assignable
mix outs, use the pan settings in the L/PAN page. For example, to
use the assignable mix out 1/2 as two mono outs, in the L/OUT
page, set the output to 1/2 and set the pan setting of the pad you
wish to output from the out 1 and 2 to L and R respectively.
User avatar

By Upright Sat Dec 09, 2006 3:05 pm
Actually if you upgrade your OS to 1.22 you can assign each output in mono just turn the data wheel until the double digits change to single digits. :D
User avatar

By Lampdog Sat Dec 09, 2006 3:53 pm
I tried, and failed miserbaly, lol.
User avatar

By Upright Sat Dec 09, 2006 4:09 pm
Lol .....your doing more than most of the people that actually own a 2500(I'm guilty of this at times :oops: ), I gotta give you props there!!1 8)
User avatar

By Lampdog Sat Dec 09, 2006 4:21 pm
I need to try harder at updating my addedums and OS change histories. I can't be failing like that, shyt happens though.
User avatar

By woodbeatz Sat Dec 09, 2006 7:19 pm
does the 2500 come with 1.22 os?

where can i download the update? the mono outs would make my life a bit easier!
 Reply
Return to MPC2500