MPC1000 RAM and CF card Recommendations

Just got my brand new MPC 1000 and got a brand new
Kingston ValueRAM 256MB 144-Pin SO-DIMM PC 133 Notebook Memory. When i installed it and turned on the mp it got to 75% then i got a memory failed error. I took out the ram and reinstalled it several times. Do i need to install that jjos program to get my ram to work? What should i do?

anyone try Powermac ram?

I got mine off ebay from a great seller. If you email him that it's for an MPC, he will guarantee the stick for you. He worked with me until we found the perfect match.

seller name: 99lucky99
email: [email protected]
piece: 256MB PC133 Laptop Memory SDRAM SODIMM RAM 133 256 PC
sale price: $29.99

I'm extremely satisfied.

TRANSCEND 45X 4GB CF works great!

I'm very new to mpc's. I just bought a mpc500 but the factory ram is insufficient.
The above posts have been very helpful in choosing new ram. I found this expansion - Kingston 256MB Memory PC133 144-pin SODIMM - at Buy.com but it is missing the 'cl3' (from what Penfold's first post mentioned)
My question is, will this Kingston ram work or should I keep looking. If it doesn't, has anyone found any good sites?

thanks

My Toshiba CL3 sodimm 256mb ram was $25 delivered.

From Ebay...

just look and be patient if you can, you may find one cheaper than mine.

SanDisk 512MB Type I Compact Flash Card. should work, right?

for the mpc500, should the 256mb work in the same manner

EMFinite wrote:

EMFinite wrote:i just copped Infineon with the following specs

when i get it i'll let yall know if it works.

Memory Capacity: (1) 256MB
Module Type: 144-pin Sdram Sodimm
Data Rate: PC133 (133Mhz) CL3
Organized as: 32M x 64 Industry Standard
Condition: Like New - Brand (Micron, Samsung, Kingston, Hynix or equivalent)
Specifications:

* 256MB PC133 memory module.
* 133MHz Synchronous DRAM (SDRAM)
* 3.3 Volt
* CL3
* Non-Parity (NP)
* Small Outline DIMM (SoDIMM)
* 144-pin (JEDEC/JEDIA standard)
* Gold-plated leads

some cats have said only the 32MX64 is the only one that works. hopefully you got that as well.

just got this today. installed and its working!

i got one with these exact same specs, the make turned out to be Infineon. works great, i bought two other pieces before someone kindly directed me here. great forum

quick question, does the speed of the cf card matter I found PQi 2 gb cf card for 19 buks x100 speed, would it work better then a regular cf card or not thanx

I found a Sandisk Type II 2GB for $30 at BestBuy last weekend. Great!

Phabeon wrote:what is the point of upgrading the memboy to 128mb?

fo those newbies...


of course i'm not one of them...

jeah


one

as simple is that mate.. to work with a bigger quantity of samples.. or, make your sequence as a sample you wouldn't manage that untill you've got 16MB of RAM.. isn't it??

sup ive got an mp1000 and I was thinking of buying this....

http://cgi.ebay.ca/256MB-SDRAM-SODIMM-P ... dZViewItem



Anything wrong with it or can i go for it ?

thanks

got 2 512 mb sandisk cf cards
work perfectly

Just installed some kingston ram Value pack 256 and it worked beautiful, also purchae a PNY 2gig CF card and it works Great ....