Stereo Spread
http://www.mpc-forums.com/viewtopic.php?t=38603
By mrcrappypantson
Fri Nov 11, 2005 7:27 am
By Krux
Wed Nov 16, 2005 12:41 am
head034 wrote:Put a long sample on a pad. Then go to the parameters page and set the overlap to MONO. Highlight the ATTACK or DECAY value and hit Open Window. Make these settings:
Attack: 0
Start: 100
Level: 0
Go to the main screen and set the 16 levels to velocity using the pads you just programmed it Chops the sample automatically, but not accurately. Adjusting the Levels Field mentioned above sets the start point of sample. Tapping pads in order 1 to 16 sounds like sample is rewinding. Results vary depending on the sample……but it’s worth checking out.
By rondiesel
Wed Nov 16, 2005 5:40 am
the mixer in the mpc is good if you dont have a hardware mixer yourself,
its nice to have it at your fingertips right inside your mpc (IN MY OPINION)
however
theres no science involved with making beats
as long as you know your technology...its 100% soul and everybody has a different one so let the Father work
its nice to have it at your fingertips right inside your mpc (IN MY OPINION)
however
theres no science involved with making beats
as long as you know your technology...its 100% soul and everybody has a different one so let the Father work
By MARCODANE79
Wed Nov 16, 2005 11:39 am
While recording or just in play back mode hold the tap tempo button and press any pad for drum roll, for those of you who didn't know.
Music Producer for Marco Dane Beats/Wyte Music
http://www.AALBMuZiK.com/
http://www.Myspace.com/MarcoDaneBeats
http://Twitter.com/MarcoDaneBeats
http://www.AALBMuZiK.com/
http://www.Myspace.com/MarcoDaneBeats
http://Twitter.com/MarcoDaneBeats
By multiman
Wed Nov 16, 2005 11:58 am
While recording or just in play back mode hold the tap tempo button and press any pad for drum roll, for those of you who didn't know.
and if you hold down the tap tempo and press 'MAIN SCREEN' the note repeat will stay so you can use both hands to do drumrolls. when your done you press tap tempo to quit the note repeat function.
By Gambles
Wed Nov 16, 2005 2:17 pm
multiman wrote:While recording or just in play back mode hold the tap tempo button and press any pad for drum roll, for those of you who didn't know.
and if you hold down the tap tempo and press 'MAIN SCREEN' the note repeat will stay so you can use both hands to do drumrolls. when your done you press tap tempo to quit the note repeat function.
Thats a new one for me. Good looks. Can't wait till get home and try it out.
Uno/1
Gams
MPC 2000XL Studio Plus*Alesis QS6.1*Cubase SX 2.01*Recycle 2*Reason 2.5*M-Audio Quattro*AKG 3000 B Mic*2 Technics 1200*Crazy vinyl
http://www.soundclick.com/bands/7/raygamblesmusic.htm
http://www.soundclick.com/bands/7/raygamblesmusic.htm
By Smoove03
Wed Nov 16, 2005 3:12 pm
multiman wrote:While recording or just in play back mode hold the tap tempo button and press any pad for drum roll, for those of you who didn't know.
and if you hold down the tap tempo and press 'MAIN SCREEN' the note repeat will stay so you can use both hands to do drumrolls. when your done you press tap tempo to quit the note repeat function.
thats tight! thanks
By psitech
Wed Nov 16, 2005 3:37 pm
MARCODANE79 wrote::? While recording or just in play back mode hold the tap tempo button and press any pad for drum roll, for those of you who didn't know.
also... earlier and later works with this too... atleast on the xl
try this for example:
1. record closed hihats with note repeat and timing set to 8th and earlier/later at zero value
2. go to timing and press open window, set for example later at maximum value (23) and timing still set to 8th... then go to main screen and and press play hold note repeat and press a pad with... say a ghost hit
this in combination with the hihats on 8th will give a nice standard roll... even though the timing is set to 8th it will play 16th but not every 16th..
By Jacpot
Wed Nov 16, 2005 3:51 pm
yeah i toyed wit dat^^^
CHOP SMALL!!
Jac The Ripper
http://www.arrogantempire.com
Follow me on Twitter @supbishes
Dark ***** Squad
Jac The Ripper
http://www.arrogantempire.com
Follow me on Twitter @supbishes
Dark ***** Squad
By placebo
Thu Nov 17, 2005 11:39 am
Nice Delay.
first loop your sample. shift + trim ->loop. select sound you want to loop and then press shift + program -> params. Set Decay to 100 . Press pad. hold it. release
sample needs to be relatively short.
but Im not sure if you guys already knew this trick..
first loop your sample. shift + trim ->loop. select sound you want to loop and then press shift + program -> params. Set Decay to 100 . Press pad. hold it. release
sample needs to be relatively short.
but Im not sure if you guys already knew this trick..
åu jee...
Last edited by placebo on Mon Dec 19, 2005 3:45 am, edited 1 time in total.
By mrcrappypantson
Thu Nov 17, 2005 4:34 pm
Smoove03 wrote:if anyone cares, I think this should be a sticky
agreed