any tips for DATA WHEEL 2000xl?

Technical questions for the MPC2000xl and the MPC2000
 Reply Share on Facebook
User avatar

By Smoove03 Tue Sep 05, 2006 1:09 pm
it would flowers up mine :(

By nanoloop Wed Sep 06, 2006 2:02 am
a wise punter would have tested that XL first, there is also some diagnostics you can run on the pads to see if there all up to scratch.i have seen this before, a friend of mine always went sick with his data wheel, especially when triming sounds, i told him to ease up and use the nv slider as the knob wouldnt last for ever and was sure to burn out at the rate he spun it. When i had a look, he had spun the knob right off and it was all burnt inside.
User avatar

By EMFinite Sun Sep 10, 2006 10:44 pm
this shht is driving me crazy!!!

its a HUGE hassle to have a fkked up data wheel..i cant get anything done.

somebody please tell me what parts i need and a lil info on how to fix it myself?

thanks
User avatar

By mnh2410 Sun Sep 10, 2006 10:53 pm
EMFinite wrote:this shht is driving me crazy!!!

its a HUGE hassle to have a fkked up data wheel..i cant get anything done.

somebody please tell me what parts i need and a lil info on how to fix it myself?

thanks


First off do you know how to solder?(not a sarcastic question either) If so then you need to contact Nick and ask him if he has the data wheel replacement in stock. (www.vstservice.com)

Nicole

By cooocooo1 Sun Sep 10, 2006 10:56 pm
does he get a discount if he tells em "coleycole" refered em?
User avatar

By mnh2410 Sun Sep 10, 2006 10:59 pm
cooocooo1 wrote:does he get a discount if he tells em "coleycole" refered em?


Say "Nicole referred me" and u might a little discount. LMAO But naw seriously I hope u get everything figured out sweetie.

Nicole
User avatar

By enotide Sun Sep 10, 2006 11:10 pm
Shift + NV slider is a good way to get around while trimming, My jog wheel acts up so I use S+NV alot.
User avatar

By distortedtekno Sun Sep 10, 2006 11:30 pm
EMF, all you need is the potentiometer for the data wheel from VST, and these soldering materials at radio shack...

http://www.radioshack.com/product/index.jsp?productId=2062737&cp=&pg=4&origkw=solder&kw=solder&parentPage=search

http://www.radioshack.com/product/index.jsp?productId=2062731&cp=&pg=5&origkw=solder&kw=solder&parentPage=search

http://www.radioshack.com/product/index.jsp?productId=2062756&cp=&pg=2&origkw=solder&kw=solder&parentPage=search

http://www.radioshack.com/product/index.jsp?productId=2062715&cp=&origkw=solder&kw=solder&parentPage=search

If you need some tips on soldering and de-soldering, google it up or PM me.
User avatar

By EMFinite Mon Sep 11, 2006 12:26 am
thanks alot man!!!

By Roc.Star Tue Sep 12, 2006 8:31 am
HMM im not expert..because if i were..it would be next to muh name..lii muh man lampdog..but any way..this might sound primative..but my wheel stopped working and when it did i opened it up and looked at the part and nothing seem to be wrong but when i pulled up and turned at the same time on the wheel it worked..so i took off the knob..grab some pliers and pulled up on the piece until it was stuck up in the position where it was moving..so now muh shi t works..and im da don and u could be too wit pliers...and a "I dont give a **** attitude"..HOLLA
User avatar

By Lampdog Tue Sep 12, 2006 9:34 am
HMM im not expert..because if i were..it would be next to muh name..lii muh man lampdog..

Huh?

and u could be too wit pliers...and a "I dont give a **** attitude"..

LMBAO
User avatar

By pt3r Tue Sep 12, 2006 10:20 am
Do as Marsellus would do. Call a coupla hard, pipe-hittin' niggers, who'll go to work on the **** with a pair of pliers and a blow torch. :lol:

By tusk Tue Sep 12, 2006 10:50 am
hahahhaa
im pi$$ing myself here
 Reply
Return to MPC2000xl, MPC2000