MPC1000 RAM and CF card Recommendations

Works like a chaaarm baby!

When i Starts The MPC it Show's Me 16MB Installed What Does It Means .......

I got a 256MB CF Card of Sandisk

maleachi wrote:When i Starts The MPC it Show's Me 16MB Installed What Does It Means .......

I got a 256MB CF Card of Sandisk

it means you can only have 16 mb of samples in the mpc at the same time. The CF card is just for saving bro...

DELL Memory ( Altohugh I believe it may be Kingston with a DELL sticker ) ... same specs. Works perfectly.
peace

maleachi wrote:When i Starts The MPC it Show's Me 16MB Installed What Does It Means .......

I got a 256MB CF Card of Sandisk

You need 256mb RAM<< to increase your sample time.

The 16mb you see when booting up is the stock 16mb RAM.

The CF Card is only for loading and/or saving your sounds, drums, samples etc.

Ok well i have 2 brand new Apacer 256MEG RAM chips not work , i dont know if they just shi,t RAM or if the brand is not compatable ,, all the spects are identical to recomended ram 144 pin 256 SODIMM CL3 but it fails on the loader screen ,, and that is 2nd one i tried so if anyone has tried this RAM and got it working let us know otherwise ,DONT BUY APACER RAM

cyklops wrote:Ok well i have 2 brand new Apacer 256MEG RAM chips not work , i dont know if they just shi,t RAM or if the brand is not compatable ,, all the spects are identical to recomended ram 144 pin 256 SODIMM CL3 but it fails on the loader screen ,, and that is 2nd one i tried so if anyone has tried this RAM and got it working let us know otherwise ,DONT BUY APACER RAM

is it PC133?

i was just about to ask that^^^

cy, post the complete specs of your purchase.

i just copped Infineon with the following specs

when i get it i'll let yall know if it works.

Memory Capacity: (1) 256MB
Module Type: 144-pin Sdram Sodimm
Data Rate: PC133 (133Mhz) CL3
Organized as: 32M x 64 Industry Standard
Condition: Like New - Brand (Micron, Samsung, Kingston, Hynix or equivalent)
Specifications:

* 256MB PC133 memory module.
* 133MHz Synchronous DRAM (SDRAM)
* 3.3 Volt
* CL3
* Non-Parity (NP)
* Small Outline DIMM (SoDIMM)
* 144-pin (JEDEC/JEDIA standard)
* Gold-plated leads

some cats have said only the 32MX64 is the only one that works. hopefully you got that as well.

is there anywere were i can find the directions for placing my 256mb ram in my mpc 1000?

chefboyarbeatz wrote:is there anywere were i can find the directions for placing my 256mb ram in my mpc 1000?

look down at my signature and click on the video link. i have a video showing how to do it. it is extremely easy.

Sparq i bought this memory ram yesterday
http://www.compusa.com/products/product ... pfp=SEARCH

and it did not work on my mpc.....

here are the specs

256MB PC133 144pin SDRAM SO-DIMM Memory Module
...ok i will look at it when get home your video, thanx for all your time. Do you live in HOllis, NY...Im always in jamaica Queens

thanx sparq i just saw the video so im gonna do it the way you showed me on the video...i was doing that ish all wrong....lol.....Please get at me and tell me if that ram i bought is good enough for it.....thanx alot again

that's way too much money to pay for that.

take a look at this.

http://www.pcsuperstore.com/products/17 ... l/froogle/

damn he got raped by comp usa.