Busted MIDI port ?

I was trying to snyc my MPC 1000 to Cubase SX when nothing would work on the 1st input then as soon as i tried the 2nd BAM! its working. The MPC itself is only like 3 months old and was purchase new, should i be sending back the MPC or is this some type of bug in the JJ ?.

Im using 4.9x, also is there some type of MIDI port testing apps ?

Strange....i just hooked up a MIDI keyboard and i can trigger sounds fine but cannot MTC sync ?

Is your clock receive set to one or both inputs?

neither i think, but if i can receive MIDI from a keyboard should i be able to receive MMC ?

Here are my setting on my MPC 1000

Sync in:2
Mode : MIDI CLOCK
Recive MMC: off

This works fine but only on the second MIDI in port, im just thinking is it worth taking it back cause it only new ?

Phunnymoney wrote:I was trying to snyc my MPC 1000 to Cubase SX when nothing would work on the 1st input then as soon as i tried the 2nd BAM! its working. The MPC itself is only like 3 months old and was purchase new, should i be sending back the MPC or is this some type of bug in the JJ ?.

Im using 4.9x, also is there some type of MIDI port testing apps ?

It should work... I'd contact the retailer and see about an exchange... don't forget to back up first though.

Phunnymoney wrote:Here are my setting on my MPC 1000

Sync in:2
Mode : MIDI CLOCK
Recive MMC: off

This works fine but only on the second MIDI in port, im just thinking is it worth taking it back cause it only new ?

Dude, there's nothing wrong with the MPC. Those settings will produce exactly the results you are getting. If you want to receive different types of sync/transport control from a different input you have to change those settings to what you want.

Wait, you didn't try setting Sync In to 1?