Loop points>>???

I would appreciate the help...i aleady tried searching for it but couldnt find it...anway, i use Soundforge 8..to chop samples sometimes....before i dump them into the MPC....now...one particular sample......its like a horn with a organ chord on the end of it...i got like the tail end of the organ on a sustain loop....when i dump the sample into the mpc...it plays it normaly when u hit the pad...without the sustain loop, but in trim mode and edit mode...when u hit the pad....the sample plays with the sustain loop on it...how do i transfer that so it plays on the pad???

RTFM!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

don't chop it in sound forge. use the 1k to chop and then adjust your start/end points there.

yeah thanks..sparqz/...overdose....i read the manual...but it doesnt tell me to use or not to use...soundforge 8...so again peace on the info sparqz....

My loop points from sf8 import properly into my 2kxl.
I've never tried that one a 1k, I don't have a 1k.

Check if the Pad in the Program is set to "One Shot" or "Note On". Sounds like this is your problem.
Stuff won´t sustain if it´s set to "One Shot".

Basic sampler knowledge, all in the manual. Read it.

thanks for the feedback, i actually couldnt find it in the manual, specifics anyway....but peace on the advice.....

Check out page 67 in the version 2.0 PDF manual. Page 59 in the original manual.

aight cool...B....thanks!!