Post your questions, opinions and reviews of the MPC1000. This forum is for discussion of the OFFICIAL Akai OS (2.1). If you wish to discuss the JJ OS, please use the dedicated JJ OS forum
By brooklynsurf Fri May 02, 2008 3:30 am
Just hooked up with a brand new MPC 1000. Managed to erase whatever came on the 128mb CF card.

1. Is the stuff I erased good or was it just some garbage samples.

2. Is the Data wheel supposed to feel wobbly and like its gonna break? It works fine but it seems wrong...

3. I got a ram upgrade, but where can I see if it works once I install it?

Thanks folks
User avatar
By Lampdog Fri May 02, 2008 7:53 am
1. Is the stuff I erased good or was it just some garbage samples.
Can't you figure that out for yourself?

3. I got a ram upgrade, but where can I see if it works once I install it?
Can't you look at the free space values in the load/save screen and figure that out?
By brooklynsurf Fri May 02, 2008 12:21 pm
1. Is the stuff I erased good or was it just some garbage samples.
Can't you figure that out for yourself?

3. I got a ram upgrade, but where can I see if it works once I install it?
Can't you look at the free space values in the load/save screen and figure that out?


Answers to your comments

1. No, I have no idea whats on there, its quality, etc... Like I said, I'm new. Searching this forum and the web, I found only one other person who erased their sh@t, and some courteous dude put it up for them to download and replace. It is no longer available. I read in one place that the samples and SFX included on the 128mb card were "pretty nice" That is all I know.

Here are the three posts I searched through:

viewtopic.php?f=15&t=86621&p=782587&hilit=erased#p782587
viewtopic.php?f=15&t=94929&p=852911&hilit=erased#p852911
viewtopic.php?f=15&t=81754

3. I guess I could look there, but reading the manual its very hard to determine where to look for the ram. Instead I found this video: http://www.youtube.com/watch?v=gqQyAQpHUpU


Thanks for being a wise ass instead of just helping out. Thanks for the nice warm welcome to the forum, I can see this is a loving place. Thanks too for helping to spread the negative vibrations of whatever it is that is bothering you. You'd be better off if you put that energy into the music instead of devising ways to answer people on forums in a childlike manner that will piss them off. What's the point?

If you don't want to give a straight answer, why waste the time and energy?

I understand that there are some lazy people out there that want Q and A on forums to do all the work for them, but I am not one of them. I search, I read.

What about this goddam data wheel? What about question number 2....I guess I'll just go to the music store to compare...
User avatar
By Lampdog Fri May 02, 2008 4:23 pm
All that typing, you could have just looked at the screens i told you about and seen the amount of free space on the mem card or in ram.

I don't represent this whole place.

You'd rather look for a video or something when all you had to do was look at the screen like I suggested.
User avatar
By thedvs01 Fri May 02, 2008 5:03 pm
how come you didn't check the samples before you deleted them?

and if I recall the mpc states how much ram is installed upon startup
By differenceofone Fri May 02, 2008 6:22 pm
well welcome to the forum but I agree you need to check what's on stuff before you erase it. Anyways upon start up it should tell you how much ram it reads and what version OS your using
User avatar
By Mazeone Fri May 02, 2008 6:30 pm
i think what he means is he accidentally erased what was on the cf card be fore he got to hear the samples.... :?
User avatar
By Ghengis Khan 47 Fri May 02, 2008 6:35 pm
F*ck a welcome! This place ain't all handsy pansy! MAN UP! If your gunna get all emotional for little sh*t like this then don't even THINK about posting something "Off Topic!" And you know you got all emotional cause you typed up a storm for those little comment!

THIS PLACE IS RUTHLESS! Wait till u meet Swiss, Leige, Otayo.... Tsk tsk...