Problems with my mpc2500 and KRK rokit powered monitors

Ok, I just got an mpc 2500. I have my two KRK monitors hooked up to my KRK rockit 10 sub woofer with mike cables and the the sub is hooked into my yamaha mg12/4 mixer with 2 quarter inch cables. I have the 2 stereo out cabels in the back of the mpc also hooked into my mixer. Now what I dont understand is that the sound coming from the mpc makes a crackling noise in one of the monitors. When I switch around the 2 stereo out cables in the back of the mpc, the crackling noise shifts to the other speaker. I have tried replacing the cables, but that didnt work and i have tried everything else that I could think of. I am wondering if there is a possible bug within the mpc itself that would cause this crackling noise or if I am doing something wrong. Its really frustrating, I just want to make music. I would appreciate any help.

did you try to change the master out to -6 db?
Also my sound improved when is switched of the master eq and compressor...

ok just turned the master level down to -6db (it was set at -12db) and so far no pops, but they come and go so we will see what happens. Thanks for the suggestion.

no problem - hope it helps...

try buying gold plated quarter inch cables that might eliminate your pops...

Dr Claw

Claw wrote:try buying gold plated quarter inch cables that might eliminate your pops...

Dr Claw

absolutely no needs for that..

There was a bug with early versions of the Akai OS which caused pops in the audio output. What version of the MPC OS are you running ?