By
Spirez
Sun May 14, 2006 5:24 pm
01. Turn the MPC2500 on while holding the [ERASE] key.
02. Release the [ERASE] key after the display shows [
MPC2500 (##MB installed)].
Now the MPC2500 is reset to the Factory Preset settings.
The following global settings are stored in the
MPC2500 :
Timing Correct (Note value, Swing%)
Click/Metronome (Count in, Rate, In play, In rec)
Step Edit Options (Auto step increment, Duration
of recorded notes)
Active track receive channel
Soft thru
Sync in
Sync out
Master level
Sustain pedal to duration
Truncate duration
Tap average
Footswitch 1
Footswitch 2
Autoload
LCD contrast
Doesn't sound like it's gonna solve anything i'm afraid. Have you tried removing the RAM completely and then booting up to see if that helps?