Lights for the Command Section of the MPC60 don't light up.

The lights for the Command Section of the MPC 60(Disk, Edit Loop, Transpose, Auto Punch, Wait For Key and Count In) do not light up. Later on, the Disk Light came on but did not turn off. Does anyone know what cable under the hood causes this? Maybe it's not connected properly. Thanks.

Disregard, I figured it out.

Mind telling me how, I have this problem now and again... open up the hood, wiggle around with some cables and it works again... would like to have an actual solution

I realized with some of the buttons, I just wasn't turning the features on and that's why the lights didn't come on. The only real light that does not come on when activated is the Disk light.

goddammit read the manual,let me guess you have 3.10e installed...or maybe 2.0...the disk indicator is disabled in the particular os version...for one solution-saving memory...don`t open it up and "wiggle around" cause it's in 100 percent working order!
the stupidity of certain people is what`s destroying these old machines...hate me now =:)

Good looking shaheatone, but damn, do you have to be so hostile, LOL.

shaheatone wrote:goddammit read the manual,let me guess you have 3.10e installed...or maybe 2.0...the disk indicator is disabled in the particular os version...for one solution-saving memory...don`t open it up and "wiggle around" cause it's in 100 percent working order!
the stupidity of certain people is what`s destroying these old machines...hate me now =:)

**** you dude, my problem is totally different it turns out, also my OS slows down for some fvkin reason. NOW SHUT THE FVCK UP IGNORANT FOOL

you wasn`t joining your english class in school or why you can't read punkass...it was all about the **** blinkin disk light and not your stupid slow down shit...anyhow now that you have proven to be an idiot i bet the issue with your mpc is simply wrong handling...now you shut up and better buy a xr-20 to "wiggle" around stupid