How to reset beat counter on stop

So on the legacy machines I used in the past, pressing stop twice would reset the sequence to the first beat of the first bar. The MPC live does not have this implemented. Does this bother anyone else? Is there something I'm missing?

You have to use play-start now.

Cockdiesel wrote:You have to use play-start now.

Wack... that obviously plays the sequence lol. The only way to reset the sequence is to highlight the counter at the top and use the minus button. I wonder if the X behaves this way too. Thats some shit they need to get right.

With want this badly!Come on it’s a piece of cake!!!

The play/ start starts play from the start
The play button plays from where you left off
The stop stops play back and sample tails/ehoes
For anything in between you can use the bar locate buttons on the MPC X and on the MPC Live the Locate button menu appears when you touch the "bars, beat, and tick" area.

I have a Push 2 with just Stop and Play. Their stop feature work the way you're expecting. Good luck

You have to hold shift and stop and it will zero out the top beat counter on the mpc live . Its faster than highlight and plus minus or the big knob when you want to zero out before re recording a track .

Double stop, then locate + backwards arrow does it for me