MIDI Programs showing Q-Link automation from other programs?

I'm seeing something weird with MIDI programs and it seems like a bug but I wanted to check on here to see if anyone else has come across this. I have two programs for two different hardware synths (Hydrasynth and Prophet 6), each connected to its own port on the MPC Live. There are some CC#s that are the same between the two programs (for example CC 50 General Purpose 3 LSB). What I've noticed is that if I record automation for CC50 on a MIDI track using the Hydrasynth program, the automation will be shown on the Prophet 6 program as well. This is obviously confusing as it looks like there's already automation on the Prophet 6 MIDI track even though there is none. Has anyone else seen this? Thanks in advance.

Each of the synths has their own MIDI channel and output port - also, this is applicable regardless of incoming MIDI CCs. Here's how you can reproduce it:

1. Setup a new MIDI program on track 1. Select any output port & channel.
2. Go to Q-Link Edit mode and assign CC# 50 to one of the Q-Link knobs. Record automation on track 1 using that Q-Link knob.
3. Setup another new MIDI program on track 2. Select a different output port & channel from track 1.
4. Go to Q-Link Edit mode on the track 2 MIDI program and assign CC# 50 to one of the Q-link knobs. Press play and you'll see the visual feedback of the track 1 automation.

For what it's worth it looks like this is just a visualization bug - the track 1 automation does not get written to track 2 when you turn on overdub or anything

This was supposed to be posted to the MPC Live section by the way - whoops! Can it be moved?

Thanks for confirming! How do we report bugs to Akai?