By macman
Sun Jun 20, 2004 8:45 am
I recently purchased a copy of the MOTU Machive Software running with a HD192 Interface on a G4 Inside Logic 6 and i must say i;am truly thinking about moving off the MPC2000XL onto this due to the endless amount of features making your work flow very creative.
You can access any sample at anytime and assign it anywhere whilst the groove is still bangin on your system.....you can add FX/ Resample/layer samples add 7 diff filter types per sample .
When you open MACHFIVE you only need to open the one on your virtual instrument cause it's designed like the S5000.6000. You can upload 16 PROGRAMS with control of every filter type on every sample on each program. also the FX section offers Per Program 4 insert fx / 4 program FX/4 Master fx/4 Aux fx/ (YES PER PROGRAM)
The have Delay's which sync straight up to your tempo....Bit crusher which as aload of mirage/asr/S900 presets for messin the sound up.
There is also a AVI extractor which reads ALL sample formats (ie) S56000/MPC/SND/ROLAND/EXS24/SD2/EMU/
I have being a big big fan of hardware samplers for many years ....but have a look at this in action even if you work it along side your set up.
You can access any sample at anytime and assign it anywhere whilst the groove is still bangin on your system.....you can add FX/ Resample/layer samples add 7 diff filter types per sample .
When you open MACHFIVE you only need to open the one on your virtual instrument cause it's designed like the S5000.6000. You can upload 16 PROGRAMS with control of every filter type on every sample on each program. also the FX section offers Per Program 4 insert fx / 4 program FX/4 Master fx/4 Aux fx/ (YES PER PROGRAM)
The have Delay's which sync straight up to your tempo....Bit crusher which as aload of mirage/asr/S900 presets for messin the sound up.
There is also a AVI extractor which reads ALL sample formats (ie) S56000/MPC/SND/ROLAND/EXS24/SD2/EMU/
I have being a big big fan of hardware samplers for many years ....but have a look at this in action even if you work it along side your set up.


