inthemix wrote:Dear all ...
An MPC 2000XL for £400 sterling. Should I go for this or would I be better spending an extra £100 to buy the MPC1000 ?
:
I wrote an article about this called MPC Wars (search for that on this forum). I listed a direct feature comparison. It’s gotten a few looks. Some people disagreed with my bottom line, which was that the newer MPC’s make more sense. (Lamp, where were you.. I was getting killed out there ☺ )?
Because you are using a 2496 I would strongly advise you to pick up at least a 1000. This is because the 1000 has 6 outputs whereas the 500 only has two. When it is time to track those drums out… and if you want to use effects from cubase on each drum, you have to track those drums out.. you will thank the gods that you have the multiple outputs.
The USB connectivity alone makes the 1000 a better choice for your situation. How were you planning on transferring your drum collection to the 2000: floppy? If you have an XL at least you can buy an MCD upgrade and use the compact flash slot. But this involves twice as much time as you’ll have to transfer the sounds to the card from your PC and then transfer them from the card to the MPC.
People will always tell you that what they used was better because it was older. There are people who will tell you the 2000 sucks and to get a 60 because Primo uses a 60. Others will tell you that you’re not REAL: if you don’t have an SP1200. Other people hate the 1200 and say you need the SP-12. If you have any doubts at all about the amazing power of akai’s new breed of samplers, just go listen to my new album “God Save The King” at samsquad.com. You can download the single “Lotus Throne” for free.
I produced the vast majority of this album on the 2500. When I played keyboards (mostly the Juno D and a little bit of Triton). I sampled them directly into the MPC, entire 4 or 8 bar phrases intact. The I would chop my own phrases and resequence on the MP. You simply can not do this on a 2000. Not enough RAM. Yes I could have done this in Logic or Cubase but the MPC 2500 makes chopping so fun. Less of an exercise in staring at waveforms. Once you have your MPC you may discover it's OS can make things very convenient and you may do more than make drum beats with it.
Oh.. one last hint.. don’t pony up for Akai’s ram. You can get double sided 256M SODIMM for like $20 or less and the MPC will read it like a single sided 128M chip.
dume41 SAM
"God Save The King" CD 12.01.2008
http://freshchoppedbeats.com http://samsquad.com