Problem With Syncing to Pro Tools 7.3

Hey guys I'm new here, sorry if this is repeat thread but I am having problems syncing to Pro Tools.

I have an MPC 2500, Mbox 2, and Pro Tools LE 7.3.

I am trying to sync the MPC to Pro Tools using the MPC as the master with Midi Time Code. I am recording each sound on its own individual track in Pro Tools using S/PDIF. Everything records fine but the timing is way off. On one track it will be 1 bar late and on another it will be 2 or 3 bars late. I have fussed around with everything I can possibly think of but no luck. I have also tried using Pro Tools as the master but it does the same thing, all the recordings are a little off beat.

Any suggestions?

DJ Hellfire wrote:http://www.digidesign.com/index.cfm?navid=3&langid=151&itemid=27770&categoryid=34

I have all that right but Pro Tools is not recording the timing properly. All the recordings are off beat.

Set the hardware buffer to the lowest setting in the playback engine under the setup menu. Increase it after you are done tracking and add plugins!

DJ Hellfire wrote:Set the hardware buffer to the lowest setting in the playback engine under the setup menu. Increase it after you are done tracking and add plugins!

Did what you said but the timing is still off.

Post a video of your problem or something. You can upload it right to photobucket for free.

DJ Hellfire wrote:Post a video of your problem or something. You can upload it right to photobucket for free.

Okay I will do it tomorrow when I get some time.