By paola
Sat May 30, 2009 4:29 pm
Hello everyone
Possibly,I am the dumbest and chumpest person on MIDI topics on earth ( no matter how many times I´ve read about it, it´s always a mess to me: I was instructed on classic music, not MIDI ).Yes, I´m dumb as hell on MIDI. so if anybody can help me, I would appreciate it:
WHAT I WANT TO DO: I want to use my mpc1000 as my master sequencer, but using my FANTOM S and my sound module PROTEUS2000 as sound sources.
So this is the set up that I have:
My Fantom S is connected to an AKAI MPC1000 like this:
AKAI´s MIDI IN (1) to Fantom´s MIDI OUT
FANTOM´s MIDI IN to AKAI´s MIDI OUT(A)
Fantom is LOCAL OFF
MPC soft thru is OFF and active track is selected to : ALL
Then, I have a sound module on MULTI MODE ( E-MU PROTEUS) connected like this:
PROTEUS Midi IN ( B) to FANTOM S MIDI thru ( so I can play PROTEUS sounds in the FANTOM )
PROTEUS Is MULTI MODE change accepted:
ALL OUTS AND INS ARE CORRECTED ROUTED TOI MY MIXER SINCE I CAN LISTEN TO BOTH OF THEM WHEN PLAYED SEPARATELY.
Well, this is what happens: I can record the FANTOM S sounds to the MPC thru its channel 1A, but I can´t play PROTEUS notes on channel 2B, they sound altogether, so one´s level must be turned off.
Yes, I should have found out the answer but after research, I´m still lost.
Can anybody help me?
Thanks
Paula
Possibly,I am the dumbest and chumpest person on MIDI topics on earth ( no matter how many times I´ve read about it, it´s always a mess to me: I was instructed on classic music, not MIDI ).Yes, I´m dumb as hell on MIDI. so if anybody can help me, I would appreciate it:
WHAT I WANT TO DO: I want to use my mpc1000 as my master sequencer, but using my FANTOM S and my sound module PROTEUS2000 as sound sources.
So this is the set up that I have:
My Fantom S is connected to an AKAI MPC1000 like this:
AKAI´s MIDI IN (1) to Fantom´s MIDI OUT
FANTOM´s MIDI IN to AKAI´s MIDI OUT(A)
Fantom is LOCAL OFF
MPC soft thru is OFF and active track is selected to : ALL
Then, I have a sound module on MULTI MODE ( E-MU PROTEUS) connected like this:
PROTEUS Midi IN ( B) to FANTOM S MIDI thru ( so I can play PROTEUS sounds in the FANTOM )
PROTEUS Is MULTI MODE change accepted:
ALL OUTS AND INS ARE CORRECTED ROUTED TOI MY MIXER SINCE I CAN LISTEN TO BOTH OF THEM WHEN PLAYED SEPARATELY.
Well, this is what happens: I can record the FANTOM S sounds to the MPC thru its channel 1A, but I can´t play PROTEUS notes on channel 2B, they sound altogether, so one´s level must be turned off.
Yes, I should have found out the answer but after research, I´m still lost.
Can anybody help me?
Thanks
Paula
[bDid you know that some] old women can also make killer beats![/b]