Forum to discuss all matters relating to the MPC1000 and MPC2500 operating systems created by 'JJ' (all versions).
User avatar
By B.A. Sun Dec 06, 2009 7:34 am
I've been using an old Sandisk 2gb cf card ever since I got my 1K but I think it's time to get a new memory card. I've been looking around and seeing these 8gb and 16gb high speed cards that have higher transfer rates than my old sandisk so my question is... are these types of cf cards compatible with a 1K with JJOS2XL or will I just spend my money and not get the full benefit from these cards? I want to get a 16gb card but want to make sure that my mpc will be able to read/use the full 16gb and that if I get a cf card with a higher transfer rate I want to be sure that I actually see an increase in sample loading time (I'm not sure if the cf card would actually have anything to do with the sample or project loading time). I'm sure I will be able to see the difference when I connect the cf card to my card reader on my pc and transfer files back and forth but will I get anything out of it when using it with my mpc? If my mpc wont recognize the full capacity of the card and/or utilize the full speed of it then I'll just get a regular old 4gb card and save some cash. I know a lot of you have hard drives but I want to stick to cf cards. Thanks guys.

-B.A.
User avatar
By B.A. Sun Dec 06, 2009 8:26 am
Also, since I'm upgrading, I wanted to upgrade my 64mb ram to the 128mb. I found an old thread that had this as the specs...PC 133, 144PIN, CL3 SODIMM, 256MB (ANY BRAND!)

I found this RAM on ebay, it's good price but will it work?

http://cgi.ebay.com/SAMSUNG-256-256MB-P ... 3ca7d67855
User avatar
By NearTao Sun Dec 06, 2009 11:52 pm
I've got a 32gb card and can see all of it. Slow as hell though, not name brand and I am sure it has horrible read/write specs. I am sure a faster read/write speed would make a difference since going to some of my smaller (but faster) cards makes a noticeable difference.
User avatar
By B.A. Mon Dec 07, 2009 2:04 am
NearTao wrote:I've got a 32gb card and can see all of it. Slow as hell though, not name brand and I am sure it has horrible read/write specs. I am sure a faster read/write speed would make a difference since going to some of my smaller (but faster) cards makes a noticeable difference.


Thanks, that's exactly what I wanted to know, I'm gonna get one of them 16gb high speed joints.

Do you know if the RAM that I found on ebay will work?

http://cgi.ebay.com/SAMSUNG-256-256MB-P ... 3ca7d67855

For less than $9 it's a steal considering mpcstuff.com sells the 128mb RAM for $75. Sounds too good to be true. Can anyone tell me anything about these ebay RAMs?

Thanks again.
User avatar
By elevated Mon Dec 07, 2009 7:06 am
Regarding the CF cards, faster card REALLY makes a difference. I went from a sandisk Ultra II to a sandisk Extreme III... and loading/saving are literally THREE times faster.
User avatar
By maara Mon Dec 07, 2009 9:14 am
B.A. wrote:
Do you know if the RAM that I found on ebay will work?

http://cgi.ebay.com/SAMSUNG-256-256MB-P ... 3ca7d67855

For less than $9 it's a steal considering mpcstuff.com sells the 128mb RAM for $75. Sounds too good to be true. Can anyone tell me anything about these ebay RAMs?

Thanks again.


Hi,
Yes it will - i bought exactly the same ram on ebay for ~ 8USD and installed it to my 2500 and its working without any problem - i can recommend it....
User avatar
By B.A. Tue Dec 08, 2009 3:05 am
elevated wrote:Regarding the CF cards, faster card REALLY makes a difference. I went from a sandisk Ultra II to a sandisk Extreme III... and loading/saving are literally THREE times faster.

maara wrote:Hi,
Yes it will - i bought exactly the same ram on ebay for ~ 8USD and installed it to my 2500 and its working without any problem - i can recommend it....


Thanks guys for clearing that up for me, I'm definitaly ready to upgrade now.