Ensoniq ASR-10 help, for ASRonians.

Forum for all other samplers & synths such as Maschine, MVs, Akai S & Z series, Roland, Korg, OP-1, analog synths etc.
 Reply Share on Facebook

Re: Ensoniq ASR-10 help, for ASRonians.

By master-ceo Mon Dec 28, 2009 6:40 pm
ion wrote:is it correct that i can not power off the SCSI CF Drive as long as the ASR 10 is ON ?

otherwise it wil damage the SCSI of my ASR 10 ?


correct
User avatar

Re: Ensoniq ASR-10 help, for ASRonians.

By ion Tue Dec 29, 2009 2:18 pm
???


hmmmm trying to format the 2GB CF Card thats in my Spyrus rd300

i choose "SCSI DECIVE" : 1 and "INTERLEAVE" : 0

it gives me a blinking *Formatting* for 1 or 2 Minutes and than says "DISK NOT RESPONDING"


am i doing sth wrong?

Re: Ensoniq ASR-10 help, for ASRonians.

By master-ceo Wed Dec 30, 2009 12:16 pm
I will make a Video just for you bro, if you haven figured it out yet.

What card are you using? make model? Try using the bottom slot of the spyrus.
User avatar

Re: Ensoniq ASR-10 help, for ASRonians.

By ion Wed Dec 30, 2009 7:11 pm
OKAY

i made my first FULL keyboard range sample set Instrument!!! amazing!

just to make sure... SAVE INSTRUMENT is all i need to save right? it saves all settings like key rangres and wavesample choppes within this?

according to how long it took to save it, that must be right.


i ve to say I LOVE THIS MASHINE!!! so inspiring and great to work on...
User avatar

Re: Ensoniq ASR-10 help, for ASRonians.

By Lampdog Wed Dec 30, 2009 7:40 pm
But you don't even need to ask that, do it, save everything and see how everything acts when loaded back in.
All this time and all these questions later your just now trying it? Cmon man, lmao.
User avatar

Re: Ensoniq ASR-10 help, for ASRonians.

By ion Sun Jan 03, 2010 12:56 am
i am getting really good with this mashine but i am running into 2 more issues, i hope you dudes are wiling to help me out of.

1) one thing is that when i want to record my keys playing (ASR samples) midi into the mpc60 i need to have "PASS EVENTS" ON in the MPC Midi, but that also has me triggering the MPC samples automaticaly, wich of course i do not want... if i change it to off its fine but not recording the notes i play. :|



2)ASR 10, i ve that Output Expander, but eventho i ve read that manual i find myself unable to RE-route my Instruments

for example if i have an effect on, the 3rd BUS is "DRY" i still get the Instrument FX´ed eventho i set it to BUS 3 in the AMP Screen.
why is that?

+ i want to route different Instruments (tracks) to different channels of the 8 i have availabe, but in the AMP setting an Instrument to AUX 1-3 still doesnt change anything.... still FX´ed and Still on ch. 1/2

any hints welcome
User avatar

Re: Ensoniq ASR-10 help, for ASRonians.

By ion Sun Jan 03, 2010 8:21 pm
damaga wrote::lol:

>>>>i am getting really good with this mashine

and still mo questions...... :angry:

why not use the web or something, do some research, do some head scratching.....instead of:

viewtopic.php?f=8&t=124676



i AM

just 2 things i didnt manage to get covered yet, and it may just be something silly that i oversee

i ve read the manuals!

i agree with the linked topic but if i for some reason are stuck with such an issue while it may take a longtime ASR user 2 Minutes to respond out of the head....
User avatar

Re: Ensoniq ASR-10 help, for ASRonians.

By Lampdog Sun Jan 03, 2010 11:17 pm
ion wrote:2)ASR 10, i ve that Output Expander, but eventho i ve read that manual i find myself unable to RE-route my Instruments


All from different pages of the manual, I placed "output expander" in the PDF search block
and hit enter, then F3 will bring up the next instance of "output expander" in the document, thus finding every
"output expander" within the pdf manual. Try it sometimes.

11) Output Expander (AUX 1, 2, 3)
This multi-pin connector is used to connect the optional OEX-6sr Output Expander box, which
provides the ASR-10 with three pairs of stereo outputs (or 6 individual outs) in addition to the
built-in stereo outputs. Each WaveSample, or an entire Instrument•Sequence Track, can be
assigned to any of the three AUX stereo pairs and can be independently panned within the stereo
field.

The Effects Busses
The output of every voice in the ASR-10 is assigned to a stereo bus. A bus, like the bus of a
mixing board, mixes together all the voices assigned to that bus into a single stereo pair. Of the
six busses on the ASR-10, three are inputs into the signal processor (BUS1, BUS2, and BUS3), and
three are direct paths to the AUX outputs on the optional Output Expander, bypassing all effect
processing (dry). The Destination Bus assignment for each WaveSample is set on the Edit/Amp
page. The voice settings in the sound can be overridden for each bank from the FX Select/FX
Bypass page.

AMP Press Edit / Amp / 1 (for Volume) 2 (for Pan)
WaveSample Volume
Use this parameter to set the volume of an individual WaveSample. This parameter also controls
the amount by which ENV 3 will modulate the WaveSample volume.
Range: 0 to 99
WaveSample Pan
Use this parameter to assign a WaveSample to a location in a stereo field, either within the main
outputs, or any of the pairs of outputs on the optional Output Expander.
Range: -99 (full left) to +99 (full right)

EDIT OUT (Output Routing)
AMP Press Edit / Amp / 9
This parameter enables you to assign instruments, layers, or WaveSamples to any of the three
effects busses. With the OEX-6sr Output Expander (optional) connected, it also allows you to
assign instrument, layers, and WaveSamples to any of the three additional auxillary stereo
outputs. This diagram shows how voices are routed through the Effects Processor and Output
Expander.

Range: BUS 1, BUS 2, BUS 3, AUX 1, AUX 2, or AUX 3
Note: When Sample•Source Select/REC SRC Field 1 is set to INPUT+FX, all Voices go DRY, and any
WaveSamples that were routed to BUS 1, 2, or 3 will all show OUT= DRY - - FX BUS IN USE on
this screen.
User avatar

Re: Ensoniq ASR-10 help, for ASRonians.

By Lampdog Sun Jan 03, 2010 11:20 pm
ion wrote:1) one thing is that when i want to record my keys playing (ASR samples) midi into the mpc60 i need to have "PASS EVENTS" ON in the MPC Midi, but that also has me triggering the MPC samples automaticaly, wich of course i do not want... if i change it to off its fine but not recording the notes i play. :|


R U using a mpc midi type track to record your asr note playing?
 Reply
Return to Other Samplers, Beat Boxes & Synths