tips on cleaning a MPC60 MKII

Share your knowledge on these two classic MPCs
 Reply Share on Facebook
User avatar

tips on cleaning a MPC60 MKII

By DJ Illustrious Sun Jan 31, 2010 3:05 am
Hey fellas, I want to know whats the best way to clean off scuffs and adhesive gunk off of the plastic shell of a 60 MKII. Would alcohol wipes be alright on the plastic? Also, I assume you have to take the top panel off with the hex screws to get in and clean the pads sensors, anyone know what size hex wrench it takes, I have a hex kit here, but none fit.
User avatar

Re: tips on cleaning a MPC60 MKII

By JUKE 179r Sun Jan 31, 2010 6:24 am
I've read in these forums people using furniture polish or the inside of an orange peel to remove gummy adhesives.

Re: tips on cleaning a MPC60 MKII

By master-ceo Sun Jan 31, 2010 12:15 pm
I have personally used Fantastik Orange Action to remove a 10 year plus old sticker from the top of my mpc60II.
Use a Q-Tip and rub it into the sticker. Saturate it with the orange action. TAKE YOUR TIME, DO IT RIGHT. lol
Image

Electrical Cleaner Spray will also work

Re: tips on cleaning a MPC60 MKII

By MPCHunter Sun Jan 31, 2010 3:37 pm
DJ Illustrious wrote:Hey fellas, I want to know whats the best way to clean off scuffs and adhesive gunk off of the plastic shell of a 60 MKII. Would alcohol wipes be alright on the plastic? Also, I assume you have to take the top panel off with the hex screws to get in and clean the pads sensors, anyone know what size hex wrench it takes, I have a hex kit here, but none fit.


Don't access the pads by removing the hex screws that are on the top of the board, you will want to pull the entire top off and then access everything from inside.

Re: tips on cleaning a MPC60 MKII

By Deta!L Sun Jan 31, 2010 4:16 pm
On the 60ii that magic eraser from Mr. Clean works great.

Re: tips on cleaning a MPC60 MKII

By skylab001 Wed Feb 03, 2010 12:10 am
Don't access the pads by removing the hex screws that are on the top of the board, you will want to pull the entire top off and then access everything from inside.


I'm glad somebody mentioned that, the metal panel is stuck to the plastic (lexon?) casing with adhesive and the hex screws, so you don't want to remove that section.

Re: tips on cleaning a MPC60 MKII

By klassik.one Fri Feb 05, 2010 3:40 am
does anyone have a link or pictures to how to disassemble the mpc60ii or explain how to undo the wiring to be able to clean the buttons? iv searched and havent been able to find anything. thanks
 Reply
Return to MPC3000, MPC60