Post your questions, opinions and reviews of the MPC1000. This forum is for discussion of the OFFICIAL Akai OS (2.1). If you wish to discuss the JJ OS, please use the dedicated JJ OS forum
By dizmaloner Tue Feb 23, 2010 5:04 am
I just purchased a m-audio audiophile usb interface, it has s/pidf just really wondering. What the benefits are and if its worth it to go that route, don know much about the technology. Any info would be appreciated
User avatar
By Lampdog Tue Feb 23, 2010 4:43 pm
You don't have to ask if you have the stuff already, just try it and see if you like it.

You CAN, use regular rca cables even though they aren't designed for spdif usage.
It won't hurt anything to try that.
User avatar
By poundaproblem Tue Feb 23, 2010 4:50 pm
SPDIF is a digital connection. By using the SPDIF out of the MPC to the SPDIF in on the interface you are avoiding the cheap pre's the maudio may have come with. You are also avoiding extra conversions. Bottom line you are getting the most accurate sound of of the machine into the computer. and yes you can use an RCA cable but it is not recommended. SPDIF cables are 75ohm and the result from using an RCA are usually clicks, pops and other errors in the signal.
By BigHE Wed Mar 10, 2010 1:10 am
poundaproblem wrote:SPDIF is a digital connection. By using the SPDIF out of the MPC to the SPDIF in on the interface you are avoiding the cheap pre's...Bottom line you are getting the most accurate sound of of the machine into the computer.


I'm following you here. I have a MPC1K tracking into a Mbox 2 Pro. Right now I am recording 6 tracks at one time.

If I have a project that is 16 tracks and I want to record into Pro Tools using only a digital signal, I am going to have to record 8 times (provided everything is mono). So, two tracks at a time, set to L and R in the MPC mixer right?

Since SPDIF mirrors Stereo and I am recording in "Song Mode" on the MPC, everthing else that I am not recording (at the time) needs to be set to something other than "L" "R" or "ST" on the MPC. Did I get that right?

Oh yeah. JJOS 4.99
User avatar
By poundaproblem Wed Mar 10, 2010 1:50 am
BigHE wrote:I have a MPC1K tracking into a Mbox 2 Pro. Right now I am recording 6 tracks at one time. If I have a project that is 16 tracks and I want to record into Pro Tools using only a digital signal, I am going to have to record 8 times (provided everything is mono). So, two tracks at a time, set to L and R in the MPC mixer right?


Correct. And its not all that bad. It takes a bit longer but not too crazy. Personally I do all my stuff 2 track. The 1k can put out a real nice sound if you get busy tweaking and use quality samples.

BigHE wrote:Since SPDIF mirrors Stereo and I am recording in "Song Mode" on the MPC, everthing else that I am not recording (at the time) needs to be set to something other than "L" "R" or "ST" on the MPC. Did I get that right?
Oh yeah. JJOS 4.99


Not sure what you mean here. Shoot me a PM
User avatar
By Lampdog Wed Mar 10, 2010 2:37 am
Or you can just mute the tracks that are not to be recorded.
By BigHE Wed Mar 10, 2010 3:33 am
Lampdog wrote:Or you can just mute the tracks that are not to be recorded.


Man, I thought I tried that, but for some reason it un-muted in song mode. I'll give it another shot though.
By BigHE Wed Mar 10, 2010 3:46 am
BigHE wrote:
Lampdog wrote:Or you can just mute the tracks that are not to be recorded.


Man, I thought I tried that, but for some reason it un-muted in song mode. I'll give it another shot though.



I swear I tried that before and it didn't work, but I think that was my MV when I was trying to track out using Solo instead of muting the others. That's another story. I got it. Good look.