boxcutter butta wrote:most of the stuff is the same as the asr10 in a sense as sampling and all except for monitoring i think?
sampling goes by selecting sample then going selecting a instrument you want to choose by pressing the button you want sample the section you want from where ever then hit the key of the instrument you selected when dont to choose a root key i usually choose c4 but continuing on then go to edit and select wave this will take you to edit the sample before cutting it up if you edit sample start and sample end it will adjust play points to the part you want then truncate that sample to preserve memory( since you only have 1mb) go to cmd wave and go over until you see truncate wavesample hit that
now your on your way to chopping
from the ensoniq sensi jaeone
"Under the cmd wave menu, there are two options that may be confusing you:
COPY WAVESAMPLE....and there is also COPY WAVE PARAMETERS (this is for things like envelope settings).
I want you to SPECIFICALLY USE THE *COPY WAVE SAMPLE* choice.
It will prompt you where you want to copy to (either the same instrument you are in or a new instrument). Choose same instrument.
It will prompt you where you want to copy to (either the same layer you are in or a new layer). Choose same layer.
Then it gives you COPY = PARAMETERS ONLY OR PARAMETERS + DATA. Choose the first choice.
I guarantee you it says wavesample X created.
I am willing to bet you were choosing copy parameters right off the start in the cmd menu instead of copy wave sample.
My directions specifically say copy wave sample first.
Let me know if still doesn't work."
and to put your samples on specific keys go to edit wave and select the wavesample then go to edit layer and adjust its keyrange to the specific key
if you need more help pm me ill try and help the best i can its been a while since ive used a eps
but yeah i tried looking up the manual for you yesterday night couldnt find it
nice thanks for the help, i appreciate it, i havent got that far into it yet,i just seen avideo but for ASR10 and it looks like the EPS what you mentioned sound similar to what was said on the video.,i will print this out and use this as the start to my manual. although i have messed around abit to try to figure it outand seen these screens you speak of i just didnt know what they did,
@TG thanks yeah i think i got that part to work for me too, its just a manual helps you when your up at 3-4am and trying to figure out things like this .
thanks again for the help fellas i appreciate it really.
and as i'm understanding these keyboards dont use wav files and i'm fuct cause i have no floppy disc drive anymore no way of transfering only sampling to this board
thanks again i'll hit you guys up if i need some more help soon, i'll have to bookmark this thread
