BG Beats, Or Anybody Who Owns A Tascam 2488 Neo

I wanted to know if any of you used your neo to EQ your samples, and how did you set it up to your MPC, im using my digital outs and ins, but you cant change the volume, thus me creating this topic, ant help is appreciated.

HAZE

The digital out volume is connected with the stereo bus. The digital inputs have to be configured in the mixer preferences. Go to menu > preferences > mixer and there you can assign the digital input to stereo pair A/B, C/D, E/F, or G/H. When recording, set the faders that your using and the stereo bus to 0 then control the record volume with the corresponding trim knobs. As far as EQ goes, just select the channel(s) that you want to EQ and press the EQ button.

Though I had the 2488 1st edition, I usually ran the stereo outs into a linked stereo of inputs on the 2488 then tracked each part at good rec level to separate onboard tracks to mix afterwards. I think the neo version has given you more harddrive space and mastering effects to work with

I meant how did you send your signals back to the MPC, i wanted to edit the sample with the NEO and send it to the MPC's digital in, but the volume was an issue, i was asking if you guys used another method or maybe im just overthinking the situation.

Ahh okay. Push the select button above the stereo fader. Where it says direct output, choose the stereo pair that your samples are on.