Sample Pitch Tune Low after Loading?!Need Help!

Dear all

I just got my MPC1000 and have this problem...well..newbie with 1000...
After load samples from CF card.
When I assign samples to Pad, all the sample pitch is diffrent compare to preview in Load Mod....they go lower pitch
Also all Tune in Program are 0, and I have to Tune up all samples about +2 to match original sample...

I have been try reinstall JJOS and Newest Akai OS, but same problem..also play the samples in DAW and same pitch in MPC Load MOD..

Is it normal or Bug? or I got broken MPC..?

P.S. I try a loop was from sampleing direct to MPc, the pitch is correct..Just don't get it...

Thanks form help

Alyi wrote:..Just don't get it...

me neither. i have some (very few) samples that are pretty high pitched in load preview and much lower when i load them. it has something to do with the .wav-file, not your mpc or jj os. and it shouldn't be a problem as you can just pitch it the way you want it after loading. so just ignore it.

pitch it up................ mode > program > param > tune +/- ?

It is because the resolution of the sample is different from the 44.1 Khz! Check it!

^^^^^^^^^^^^^^^^
and theres your answer

Thanks guys

but some 44.1 samples still have this problem..

Well... I guess I have to used to it

hello i have the same problem, did you find a solution?

this happend me when i have sync with my firewire soundcard and sync over spidif was not set correctly - all samples were downtuned...

If you have anything connected to the spdif in make sure whatever digital signal is coming in is at 44.1kHz.
Not saying you have anything connected to the digi in... juss saying

jimmie wrote:If you have anything connected to the spdif in make sure whatever digital signal is coming in is at 44.1kHz.
Not saying you have anything connected to the digi in... juss saying

thats exactly what i have been talking about