Forum to discuss all matters relating to the MPC1000 and MPC2500 operating systems created by 'JJ' (all versions).
By Adam_Fulara Tue Oct 12, 2010 8:25 pm
I have guitar MIDI controler (AXON mkII) joined to MIDI IN of MPC @ JJ OS 1.

It recognizes pitch bends via midi, as promissed in JJ OS 1, but each string of guitar gives signal on another channel.

First string = midi channel 1
Second = midi 2
Third....


Sixth = midi channel 6

And then, if I play 2 notes at the same time, one on channel 1 (string 1st), and the second on channel 3 (string 3), and I will make a pitch-bend on string 1, then I hear the sample on string 3 also has been changed by this pitch bend in the same way. When I make a vibrato on one string, the second will have vibrato too, although it has been not vibrated.


So one pitch bend on channel 1 make an effect of pitch bend on each channel on midi IN and I don't want it.

In MIDI options I have selected Active track recive channel ALL.
When I will choice 1, then only string 1 is played by MPC.

Interesting is, that when I would use only MPC as a recording MIDI tool, and play the same situation on AXON module, everything is working fine (midi: AXON - MPC - AXON and then record playing guitar, and then I press PLAY in MPC it's working fine).