Filter question

Technical questions for the MPC2000xl and the MPC2000
 Reply Share on Facebook
User avatar

Re: Filter question

By mr_debauch Thu Oct 21, 2010 4:52 pm
RTFM!! :lol:

just kidding man, yeah lpf only unless you got eb16.. then you got hpf and a pile of other junk.
User avatar

Re: Filter question

By Fung45 Sun Oct 24, 2010 6:01 am
xl manual pg 124
Low pass filter and resonance filter
Each filter has an AD envelope as well as a function allowing the velocity of the note to control the filter, to get to these setting hit open window over either the Freq: or Reson: feilds
• Attack:
This sets the attack time of the filter envelope. The larger the value, the more time it takes
for the sound to clarify.
• Decay:
This sets the decay time of the filter envelope. The larger the value, the softer the decay of
the cut off frequency becomes.
• Amount:
This sets the depth of the filter envelope. The larger the value, the larger the effect of the
filter envelope becomes. The envelope is disabled when it is set to 0.
• Velo>Freq:
This allows the velocity to control the filter. The larger the value, the clearer the sound becomes
with the impact of the velocity. When this is set to 0, the tone is the same regardless of
the velocity impact.
• Velo:
This displays the velocity in real time when the dum pad is hit.
 Reply
Return to MPC2000xl, MPC2000