
By Sooty_G
Sun Dec 05, 2010 6:49 am
always wanted to post one of these
-------------------------------------------------------------------
Addition & Change: MPC1000 OS2XL Ver1.45 05-DEC-2010
-------------------------------------------------------------------
1. The modulation wheel of a MIDI controller is made effective against the sample of MPC.
Refer to video.
2. The value of the parameter of an effect is controllable by a MIDI controller. (Only FX2, FX1 is not controllable.)
If the value of Time of DELAY is changed during a play, a noise will occur.
This is a limit of CPU which is not a bug.
Refer to on-line manual.
Refer to video.
3. The level and pan of a mixer are controllable by a MIDI controller.
A pad is controllable only to A01-A16.
The mixer of a track is not controllable.
CC currently recorded on the sequence does not work in a mixer. (The mixer automation by CC does not work.)
Refer to on-line manual.
Refer to video.
4. [MIDI/SYNC]
MIDI IN Monitor Addition
Refer to on-line manual.
Refer to video.
<Change>
Record of Pad to MIDI out CC is possible.
Notes
When it is in "Pad to MIDI out CC" mode, it is not sounded even if it hit pads.
Moreover, even if the recording in the case of being this mode hit pads, a pad event is not recorded but only MIDI CC is recorded.
http://www7a.biglobe.ne.jp/~mpc1000/bug/
tons of great additions in here! solid work, JJ!
-------------------------------------------------------------------
Addition & Change: MPC1000 OS2XL Ver1.45 05-DEC-2010
-------------------------------------------------------------------
1. The modulation wheel of a MIDI controller is made effective against the sample of MPC.
Refer to video.
2. The value of the parameter of an effect is controllable by a MIDI controller. (Only FX2, FX1 is not controllable.)
If the value of Time of DELAY is changed during a play, a noise will occur.
This is a limit of CPU which is not a bug.
Refer to on-line manual.
Refer to video.
3. The level and pan of a mixer are controllable by a MIDI controller.
A pad is controllable only to A01-A16.
The mixer of a track is not controllable.
CC currently recorded on the sequence does not work in a mixer. (The mixer automation by CC does not work.)
Refer to on-line manual.
Refer to video.
4. [MIDI/SYNC]
MIDI IN Monitor Addition
Refer to on-line manual.
Refer to video.
<Change>
Record of Pad to MIDI out CC is possible.
Notes
When it is in "Pad to MIDI out CC" mode, it is not sounded even if it hit pads.
Moreover, even if the recording in the case of being this mode hit pads, a pad event is not recorded but only MIDI CC is recorded.
http://www7a.biglobe.ne.jp/~mpc1000/bug/
tons of great additions in here! solid work, JJ!







