Discuss the various methods you use in music production, from compressor settings to equipment type.
By CurlyWS Thu Jan 13, 2011 8:30 pm
Well............. I've been searching and searching for answers and frankly I'm just getting dragged down further into the rabbit hole.

Heres what I've been doing,
I create samples live with a microphone into 2 Korg KP3'S, buying the second kp3 in retrospect basically just for the additional 4 sample banks.
If you know of artists like dub fx or beardyman you will know what sort of thing I'm on about

beardyman link ---> http://www.youtube.com/watch?v=2XryzjprNqE

So I have these two rocking out (not like beardyman just yet Razz) and so want to start recording. However when I record like this now, I'm simply getting a singular audio recording of my performance with no ability to edit mistakes etc. in my digital interface.

However, I don't want anything software based for the looping as I find this kills spontaneous momentum. My research so far has led me to believe I'm looking for a sampler but with multi-track outputs for each sample bank, however I use this termonology with caution due to my weak knowledge of music tech.

I need it to function like the kp3, playback occuring instantly after a sample's recording and also 'background' syncing when the sample is turned off. When turned back on again I want it to join the music in sync and not from the start of the loop. Other than that any other features the device has to other will probably never get used. I'm not after any 'additional' selling points like effects or pre loaded samples so much.

So I have about £400 give n take but would still like info on anything of a higher value if my price range is too low. Hipocritally to what I mentioned above I have looked at getting a mpc as I like the idea of being able to play with one shot samples I could take from youtube clips to add to my performance but I read somewhere It can't perform to my looping needs (which I mentioned in the above paragraph) My question is, is this true? can I get an MPC to loop samples in real time acting somewhat like an extention of sample banks to my kp3? and if not does anyone know of any hardware which has the multi-track recording capability like the mpc has, coupled with the looping power of any dedicated looping station like the BOSS RC-50

Anyway, any responses are much appreciated and I fully understand if you don't know what heck I'm going on about because It took me 2 days of googling 'recording live loops' just to be able to write down what I just regurgitated =P
By CurlyWS Thu Jan 13, 2011 11:41 pm
Right I made have to conform to this then. How though, will Ableton record seperate loops if they are all going from one aux out. Are there settings to get around that? also that pad you linked, what are the benefits of using that in conjuction with my KP3's and ableton as the descriptions are pretty brief of what it does.
Thanks again.
By Undertow Fri Jan 14, 2011 12:05 am
Getting Live is good advice. Ableton actually has a Looper built in that does what it sounds like you're looking for and if that's not sufficient use Clips and configure your controller to launch them. Apple's Mainstage has similar features but I didn't even bother installing it, so I'm not too familiar with it.